Knock, measure, scrape, and see 4 strokes to choose tiles
2024-07-31 04:02:59
Want to pick a cheap tile? Although you are not professional, you can learn about the quality of the tiles through some simple techniques. 
Hengfu Ceramics Mona Lisa Tiles When consumers buy tiles, they may have little knowledge of tiles. How do you buy them and pay attention to the problems when buying tiles? Here are some ways to choose a tile.
Listen to the sound density. There are many criteria for distinguishing tiles, which can be tapped. The crisper the sound, the higher the porcelainity and the better the quality. You can also use your left thumb, forefinger, and middle finger to clip a corner of the tile. Hang it down easily and tap the lower part of the tile with your right index finger. The voice is clear and bright, and the sound is pleasing to the top.
The water absorption rate of the tiles was measured. The lower the tile's water absorption rate, the higher the intrinsic stability of the tile, and the more suitable it is for the wet water or the space with higher moisture content, and it will not cause black spots and other problems. The common method to check the water absorption of a tile is to pour the back of the tile. The tile that penetrates slowly or even does not seep water is of better quality, and vice versa.
Scratch to see the quality from the traces. Check the quality of the surface of the tile, you can use a hard object to scrape the tile glaze, if you leave a mark, indicating poor quality.
Look at the color and flatness. The clearer the color of the tile is, the better it is to see if there is any pinhole in the naked eye, the pinhole is easy to accumulate dirt, and finally the flatness of the tile is observed, the side is straight, and the laying is easy and the effect is good. In home decoration, if you want to save the tiles and reduce the cost, it is recommended to consider the following points:
1.) Find a designer, select the appropriate specifications, and draw a row of bricks. Calculate the number of tiles according to the figure, plus the normal construction loss.
2.) Choose a variety that does not require high levels of "fight for colors" and "fight for patterns" so that the cut half (or edge) can be used elsewhere.
3) Adjust the design of the plane and facade to avoid the need to cut, easily break, and waste tiles where the risers and small corners are covered.
4,) Clever use of waist line, other specifications tile mosaic color, floor circle line, vertical decoration line, bathroom wall mirror size and other aspects of the design, enrich the effect at the same time, to avoid or reduce the cut tile.
5) Master the principle of "small blocks of bricks and large blocks of bricks". Combined with the design effect, reasonable selection of small specifications.
6.) Select high-quality tiles and skilled workers to reduce unnecessary wear and tear during construction and cutting. Although the unit price is slightly higher, it is still economical to make a comprehensive calculation.
Links: Talk about Home Colors: Color Emotions
3D Wire Fence Introduction:
Hengfu Ceramics Mona Lisa Tiles When consumers buy tiles, they may have little knowledge of tiles. How do you buy them and pay attention to the problems when buying tiles? Here are some ways to choose a tile.
Listen to the sound density. There are many criteria for distinguishing tiles, which can be tapped. The crisper the sound, the higher the porcelainity and the better the quality. You can also use your left thumb, forefinger, and middle finger to clip a corner of the tile. Hang it down easily and tap the lower part of the tile with your right index finger. The voice is clear and bright, and the sound is pleasing to the top.
The water absorption rate of the tiles was measured. The lower the tile's water absorption rate, the higher the intrinsic stability of the tile, and the more suitable it is for the wet water or the space with higher moisture content, and it will not cause black spots and other problems. The common method to check the water absorption of a tile is to pour the back of the tile. The tile that penetrates slowly or even does not seep water is of better quality, and vice versa.
Scratch to see the quality from the traces. Check the quality of the surface of the tile, you can use a hard object to scrape the tile glaze, if you leave a mark, indicating poor quality.
Look at the color and flatness. The clearer the color of the tile is, the better it is to see if there is any pinhole in the naked eye, the pinhole is easy to accumulate dirt, and finally the flatness of the tile is observed, the side is straight, and the laying is easy and the effect is good. In home decoration, if you want to save the tiles and reduce the cost, it is recommended to consider the following points:
1.) Find a designer, select the appropriate specifications, and draw a row of bricks. Calculate the number of tiles according to the figure, plus the normal construction loss.
2.) Choose a variety that does not require high levels of "fight for colors" and "fight for patterns" so that the cut half (or edge) can be used elsewhere.
3) Adjust the design of the plane and facade to avoid the need to cut, easily break, and waste tiles where the risers and small corners are covered.
4,) Clever use of waist line, other specifications tile mosaic color, floor circle line, vertical decoration line, bathroom wall mirror size and other aspects of the design, enrich the effect at the same time, to avoid or reduce the cut tile.
5) Master the principle of "small blocks of bricks and large blocks of bricks". Combined with the design effect, reasonable selection of small specifications.
6.) Select high-quality tiles and skilled workers to reduce unnecessary wear and tear during construction and cutting. Although the unit price is slightly higher, it is still economical to make a comprehensive calculation.
Links: Talk about Home Colors: Color Emotions
Tiles Home Furnishing Home Furnishing Home Furnishing Decoration Home Furnishing Bathroom Design Bathroom Tiles Colors Bathroom Tiles Bathroom Size Home Decoration Home Tiles Decoration Home Decor Tiles
3D Panel Fence
3D Wire Fence Introduction:
- 3D Wire Fence is also called
the Curved Wire Mesh fence. This is a new type of fencing, which is
mainly popular in developed countries such as the United States, Japan,
Korea, and so on. The 3d fence has the characteristics of beautiful
appearance, no limitation of terrain fluctuation and convenient
installation.
- 3D Wire Fence is wide used
for Garden, factory, road, highway, public buildings, parks, government
buildings, ball court, industry & commercial sector and so on.
3D Panel Fence,3D Mesh Fence,3D Wire Fence,3D Wire Mesh Fence
HeBei Bosen Metal Products Co.,Ltd , https://www.hbbosenfence.com