How to decorate the basement

How do you know how to decorate the basement? Many places, such as shopping malls, and some rental houses, need to build some basements. How to decorate our basement in the end is also a problem that friends often care about, so I will elaborate on us in detail. How to decorate this basement, friends can also refer to it, and what are the precautions when decorating the basement.

First, the basement introduction

1. The basement means that the height of the room floor below the outdoor ground level exceeds one-half of the net height of the room. Multi-storey and high-rise buildings require a deeper foundation. To use this height, building a basement under the building's ground floor can increase the use area and save the room backfill, which is relatively economical.

2. Building a basement below the ground floor of the building can improve the efficiency of the building land. Some high-rise building bases are deeply buried, making full use of this depth to build a basement, which is economically effective and effective. According to the function of the basement, there are common basement and venting basement; according to the structural materials, there are brick walls and concrete structure basement, which are divided into structures, with full basement and semi-basement.

Second, how to decorate the basement

1. Moisture protection is the first problem that needs to be solved in basement renovation. Therefore, in the decoration, it is necessary to select materials with better moisture-proof effect. Generally, the ground floor of the basement can be made of vitrified bricks, the walls are covered with wallpaper, and the ceiling is covered with plaster, and wood products are used as little as possible, because the wood products are susceptible to mildew by moisture.

2. Lighting is another problem that needs to be solved when the basement is renovated. The basement is not on the ground, there is no way to use the gates and windows to illuminate, so you must choose a light fixture with better brightness. In addition, you can use some mirrors to refract light, thus increasing the brightness of the basement.

3, the basement is generally dull air, which is caused by poor ventilation in the basement, so be sure to install a good ventilation equipment during the renovation, often ventilation, in addition, you can also add more green plants This can also improve the air quality of the basement.

4, to ensure the height of the basement, is another place to pay attention to when the basement is renovated. After all, the basement is not like an ordinary room. The air is circulated and the light is bright. The occupants naturally feel comfortable. After all, the basement is not on the ground. If it is not guaranteed to have a height of 2.5 meters after renovation, it will make people feel depressed and uncomfortable.

Third, the basement decoration precautions

1. Before the basement is renovated, it is necessary to carefully check the basement drawings, whether the various functional rooms are complete, whether the location of the equipment room, boiler room, meter reading room, and newspaper room is reasonable.

2. Before the basement decoration construction unit enters the site, it shall meet with the supervision unit and the civil engineering unit to carry out the work surface handover work, and focus on checking whether the wall top floor meets the decoration requirements, otherwise notify the civil construction unit to rectify until it is qualified.

3. The basement equipment installation unit enters the site as early as possible to avoid conflicts with the working surface of the decoration unit, cross-operation and repeated construction.

4. The entrance and exit of the basement should fully consider the interception volume of the intercepting ditch, in order to cope with the heavy rain and generate a large amount of water into the basement in a short time. Similarly, in the doorway of the elevator car and the driveway, the gate of the boiler house should be cut off to avoid heavy rain. Seasonal rain enters the room.

5, the underground outdoor wall waterproof must be done well, to avoid rain or ground water leakage into the basement, causing damage to the decoration surface, secondary decoration.

How to decorate the basement, we have learned nothing, what kind of structure house is in our basement, we have learned in the first paragraph of the article, then how to decorate the basement and what are the precautions when decorating? Friends have already mastered, then everyone continues to pay attention to our decoration home network, to understand other decorative information.

More related wonderful reading:

How to decorate the basement? Appreciation of the basement decoration renderings

Stainless Steel Sliding Door

Characteristics and Advantages

(1) Intelligent control design: adjustable main parameter and secondary parameter automatically according to the weight of door leaves;

(2) Low noise: Special static sound track, integration of motor, worm-gear and retarder.

(3) Anti-clamping function: automatically reverse when meeting barriers;

(4) Unique electronic motor lock: the motor will lock up when the door is forced to open.(controlled by remote or switch)

(5) Tighten force: seal door when closed, power consumption approximately 10W under standby;

(6) Advanced brushless motor(36V,100W) can automatically adopt different heavy door leaves;

(7) Bi-doors inter-locking: one of the door leaves always remains closing;

(8)Safety sensor terminal: sensor stops working when door closed;

(9)Unique coating technology: never rusty;

(10)Easy and convenient to install;

(11)Working Process: when the door leaf closes to the right place, the door leaf will slightly shift to the door frame and the ground. The rubbers on the four sides of the door leaf will completely combine with door frame and ground, which ensures air tightness. When the door is open, the rubbers will separate from door frame and ground, which avoids contraction on the ground.

Technical Specification

Technical Details:

(1) Rubber lining sealing technology combined with V groove on the guide rail enables the door completely sealed when the door closed;

(2)Special door body location technology. Semicircular surface beam on the ground matches with the V style groove at the bottom of door leaf, which stop the door from swing and make sure it moves stable and smooth;

(3) The door body decorated with matte stainless steel or spray surface, and on the middle and both sides with sealing stripes to ensure the hermetic effect.

(4)Feet sensor switch applied to avoid contagion;

Stainless Steel Sliding Door,Stainless Steel Bypass Sliding Door,Stainless Steel Interior Sliding Door,Stainless Steel Folding Sliding Door

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hffastdoor.com