Size details for making tatami notes
Tatami now to become home decoration simple decoration when one kind of way, but in general very few studies for tatami size, good home network Xiaobian today go with you to look at the tatami size.
Tatami size height description
The design height of the platform:
When the lifting table is not designed, the height of the platform is generally designed to be between 150mm and 200mm. According to the professional, the Japanese tatami is generally 30cm above the ground, while the Chinese is about 15cm. When designing the lifting table, the height of the platform should be the height and elevation of the lifting table that the customer ordered. The size of the tatami floor indicates that the family needs to be a platform. It is better to have a higher house. For example, a room with a height of 2.9 meters can be considered to use the floor to create an effect. The practice of the platform is relatively simple, that is, the wooden keel is placed at a distance within the range where the platform needs to be set, and then the wooden floor is fully covered on the keel. If you need to use the space under the table to store items, you can also leave a seesaw on the floor, so you can easily access the items.
In general, the design height of a tatami is determined by the height of the house and the height of the storage space required. If the height of the house is high, the tatami design of 3 meters or more and 40 cm or more is more practical. If the height of the floor is short, the height of the design will be correspondingly reduced, otherwise people will feel suppressed when they are active. It is worth noting that especially for small-sized homes, because of the low space and small size, if you choose complex, especially too regular ceilings, it is easy to cause space depression and strong feeling after designing tatami. Therefore, for small-sized tatami design, you should also choose a simple and thin ceiling design, or do not make a ceiling, you can also choose a non-regular ceiling design, you can also break the conventional materials, try some new materials, both stretching space and creativity.
1. Tatami has standard regular rectangles and non-standard rectangles.
The length ratio of the regular rectangle is - length: width = 2:1, tatami size is 1800mm × 900mm, standard thickness is 35mm, 45mm, 55mm, but generally adopts 55mm thickness specifications, other sizes are very use less.
2, tatami laying design instructions:
(1) Tatami should not be laid directly on the concrete floor and should be laid on the designed wooden platform.
(2) If the room where the tatami is laid is shaped (beveled, non-linear or non-orthogonal): We recommend that the profiled part be considered to be straight with other materials (wood). The tatami fixed side of the line can be changed from face to face, but the tatami fixed side line (on the tatami part) must be 90° straight, and the tatami fixed side line of the door cover part can be omitted.
After the above parts are processed, the regular size tatami is inlaid and installed. If the customer has the requirement to retain the irregular arc, it can also be customized.
(3) The standard and room tatami design sheets are 4.5 stickers, 6 stickers, 8 stickers, 10 stickers (also called N. stickers), the minimum design number of tatami rooms is 4.5 stickers, rectangular 4.5 stickers long 6 stickers; Rectangular 8 sticks long N stick.
The above is the tatami size knowledge that Xiaobian has arranged for you. If you want to know more information, you can pay attention to the official website of our home.
About high speed Door Accessories:
1.Driving system: High Speed Door Servo System motor and control, motor SNMA / SEJ +reducer+flang+encoder+control box
2.Other accessories: Middle aluminium bar, bottom aluminium bar, aluminium vertical track, stainless steel vertical track, brushes,round nylon strip, PVC roll, rolling steel tube complete, drum be;;s for rolling tube, side end covers, stainless steel cover, steel tubes, air bag sensor system, safety light beam, Microwave sensor 24 Gigahertz,PVC welding machine, smoke and fire sensors, PVC transparent window, magnetic loop, photocell, remote control, manual push button, sound warning alarm Led lamp traffic light
For some main accessories, here is detain introduction:
1).24G radar sensor:
Brand: Hofic
Technology: Microwave processor
Maintain time: 0.5s
Protection: IP54
Transmitting frequency: 24.125GHz
Maximum installation height: <5meter
Transmitting power density: <5mw/cm2
Power consumption: <1W(VA)
Installation angle: 0-90°(lengthways) -30-30°(crosswise)
Supply voltage: AC&DC 12V-30V
2).Photocell:
Approval CE & ISO9001
Power supply AC/DC 12-30V
Static current 25A
Action current 40mA
Mounting distance Max 10m
NO or NC contact Done by NO./NC. contact selection
Working environment temperature -42℃ to +45℃
Working environment humidity 10 to 90%RH
Appearance dimensions( controller) 123*50*32mm(L*W*H)
Appearance dimensions(Magic eye head) 19*13mm(L*D)
3). Remote control
Operating Voltage: AC220V/50HZ+-20%
Transmit power:≤100mW;Super regenerative module, strong anti-interference
Operating temperature:-30℃-+70℃
Working frequency: 433MHZ;transmitter 1527, millions of encoding chip
Accept sensitivity:≤110dB
Manipulation method: electric remote control
Configure the quantity: Wireless number; factory configuration transmitter two. Can be equipped with PT2272 digital decoder chip
Configure the function: Up, down, stop, anti-lock full-featured reproduction
4). Magnetic loop
Voltage: 12V AC/DC +-10% 24V 115V AC+-10% 230V
Power: <2VA
Continued electrical output: 7A / 250V AC
Frequency range: 20 to 200K Hz
Response time: infinity (factory setting) or adjust maintain time
Sensitivity: 0.01% to 0.1% divided into 3 levels
Protection level: IP30
Electromagnetic compatibility (EMC) Complies with EM50081-1 and EN50082-2
Detection loop inductance: the limit of 40uH to 100uH ideal value 80uH to 300uH
Operating temperature: -25 ℃ to 70 ℃
Storage temperature: -40 ℃ to 85 ℃
Relative humidity: <90% non-condensing
Temperature compensation: automatic compensation up to 50 ℃ / h
Connection type: 11 pin DIN rail socket
Dimensions: 41 * 78 * 85 mm (width * height * length)
Weight: 250 grams
5). manual push button
This exit switch button is made of ABS and has built-in indicator light make it looks more elegant and fashionbale. It can be widely used in public entrance gates, public door, home, office, hotel, etc.
Door Exit Button Push To Exit Switch Door Opener For Access Control Security
Main Feature
Fashionable appearance
Made of ABS Plastic
Easy to install and operate
Used for access control
Specification
Mechanical Life: 500,000 test
Material: Plastic
6). Limit switch encoder
Voltage: DC5V-24V
Output voltage: high voltage≥85%Vcc, low voltage≤0.5V
Maximum mechanical speed:6000rpm
Anti-vibration: 50m/s,10-200HZ,XYZeach way 2 times.
Current consumption:≤30mA
Response frequency: 0-100KHZ
Protection: waterproof,oil proof,dust prevention, IP54
The output code system: binary code
Operating life: MTBF≥30000(+25℃,2000rpm)
Rotational inertia:4.0x10-8kgm²
Maximum load:radial direction20N
Axial direction:10N
Weight: about 0.4kg
High Speed Door Accessories,High Speed Door,Electronic High Speed Door Accessories
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hongfadoor.com