It is hard to learn how to use these 6 strokes!
When we are decorating, tiles are used in many places. However, during the renovation, it often appears that the purchased tiles are not enough, causing the budget to keep rising. The estimation of tiles is wrong. On the one hand, it is due to our calculation errors. On the other hand, due to our extravagance and waste, in fact, as long as the construction process is good. , we can not only avoid waste, but can even save!
First, estimate the number of tiles used
Find a designer, choose the right size, and draw a row of bricks. Calculate the number of tiles according to the figure, plus the normal construction loss. Is the shop 600? 800's? Or 1000 or other specifications? this is a problem! The current floor tiles, especially the floor tiles used in the living room, are mainly 500mm, 600mm, 800mm, and 1000mm (ie, 1 meter), among which 600mm and 800mm are the most used. How to choose? It is recommended to choose according to the area of ​​the paving and the placement of the furniture. Since 600mm bricks per unit area have more bricks than 800mm bricks, the space can be expanded visually. At the same time, the waste rate when laying corners is lower than 800mm bricks, while the space is large 800. Even 1 meter bricks look atmospheric. Therefore, it is recommended that the space of less than 40 square meters choose 600mm specifications of the floor tiles; and more than 40 square meters of space can choose 800mm or one meter of floor tiles. It is worth noting that if you have too much furniture (such as a bedroom) in your room and you cover a large piece of floor, it is best to use a 600mm floor tile.
Second, use easy-cut tiles
Select varieties that do not require high levels of "fight to suit" and "fight to match", so that the cut half (or edge) can be used elsewhere.
Third, optimizing the decoration design
Adjust the design of the plane and facade to avoid the need to cut tubes, small corners, and cut tiles that are easily damaged and waste tiles.
ceramic tile
Polypropylene PP fabric non woven geotextile for geobag road landfill mine projects is used to separate,filter,reinforce, protect or drain. Geotextiles are commenly used to separate layers like clay and drainage and to protect liner from damage. Polyester Filament Needle Punched Geotextile was made from virgin polyester chips, the continous filament was extruded from
polyester chip by machine directly by spunbond process. Pet Long Fiber Nonwoven Geotextile punch together to get the stable 3D
with highter strength fabric. so Nonwoven Geotextile Fiber has high strength, good creep property excellent and erosion
resistance, aging-resistance and heat resistance.
Description:
Made from PET(polyester) or PP(polypropylene) by nonwoven needle punched manufacturing, it has isolation, filtration, drainage,
reinforcement, protection and maintenance etc. fuction.
Specification:
(1). 80g/m2~1000g/m2
(2). 1m~8m in roll width, the length as client's request.
(3). Color: white , black , green or at your request
Property:
(1). Good flexibility, resistant to corrosion, resistant to acids and alkali, anti-oxidation
(2). Separation, filtration, drainage, reinforcement , protection and maintentance function.
1. UV resistant.
2. High temperature resistance to up to 230℃ maintaining structure stability and original physical properties.
3. High flat drainage and vertical permeability.
4. High creep resistance.
5. Resistance of erosion of chemicals in soil as well as thecorrosion of gasoline and diesel etc.
6. High elongation under certain stress, thus able to adapt to uneven and irregular bases.
Product Application
1.Water conservancy project and hydropower projects.
2.Road paving, railway.
3.Airport and port.
4.River band protection and tunnel.
5. Environmental protection, etc.
Product Equipment
Company Information
Shandong Jinruixiang Geoetextilel Material Co.,Ltd. is a high-tech enterprise which integrates development, design, production, consultation, construction, domestic and international trade of new earthwork synthetic material. The company was established since 2000 and located in No. 10 Yuanshan Road, High-Tech Development Zone, Laiwu district, Jinan City, Shandong Province, China.
The company has specialized in producing geotechnical material including HDPE geomembrane, LDPE geomembrane, LLDPE geomembrane, EVA waterproof board, Composite Geomembrane, polypropylene geotextile, polyester geotextile, woven geotextile more than 15 years. The products are widely used in the field such as the landfill, pond, mine, garden landscape, water conservancy, highway, railway, oil field, biogas, industry and aquaculture etc.
Client Feedback
Packaging & Shipping
FAQ
Q : Are you a factory or trading company?
A : We are a professional manufacturer that specialized in geomembrane, geotextile, composite geomembrane etc with ISO9001 certificate more than 15 years.
Q : Where is your factory located? How can I visit there?
A : Our facoty is located is No.10 Yuanshan Road High-tech Development Zone, Laiwu District, Jinan City China. You can take the plan to Jinan Yaoqiang International Airport, then we can pick you up.
Q : Could you send the sample before order confirmation?
A : Yes, we'd love to send a free sample to you for an evaluation if you need.
Q : How about the delivery time?
A : General within 3-7 days after received the deposit.
Q : Can you produce the product according to customers' requirements?
A : Sure, we are professional manufacturer, OEM and ODM are both welcome.
Q : Are you the Gold and Assessed supplier on alibaba?
A : Yes. We are the gold and assessed supplier on alibaba and has got the factory report by SGS.
Nonwoven Geotextiles,Driveway Geotextile Fabric,Soil Reinforcement Geotextile,Road Construction Fabric
Shandong Jinruixiang Geotextile Material Co., Ltd , https://www.jrxgeosynthetics.com