Tiling market traps interpretation tile buy 12 tricks
Put a few drops of tea juice or water on the back of the tile. After a few minutes, depending on the degree of inhalation and diffusion of water droplets, the quality of the product is good if it does not absorb water or has low water absorption.
Mona Lisa Tiles
Listen to the tile: Look at the site for broken bricks, broken tiles, and hear the sound of bricks.
Tiles with clear colors and natural colors indicate high degree of porcelainity, unclear chromaticity and low degree of porcelainity.
In the case of purchase, the presence of pinholes on the surface is visually observed within one meter. If there is, the glaze is not completely fused, and dirt may easily accumulate.
Observation of Warpage: Using the naked eye to see if the side of the tile is straight, if the warpage is serious, it will affect the firmness of the tile in the future.
Check the squareness of the tile: Place the four bricks on the ground and change the combination edge to see if the cross and gap in the middle are even.
Tap the tile to hear the sound is crisp, the sound is more brittle, the degree of porcelain, the higher the density, good hardness.
Scratch the tile with a sharp object to see if there are scratches. If scratches indicate that the surface hardness is not enough, the glazed surface will not clean the brick surface.
Check the flatness: Move any two bricks facing one another and turn one of them to see if it can rotate. If it can rotate, it means that the brick surface is uneven.
Brightness reflection: Enter the room, turn all the lights on, and see the flatness from the brightness of the product. If the brightness of the ground area is quite different, it indicates that the bathroom tile surface finish is poor. Of course, professional instruments are needed for further testing.
Edge combination: Look at the combination of bathroom tile edges. Because the paving is usually spread out from the house to the door, if the bricks are of good quality and uniform size, then from the inside out, all the collage gaps should be the same width. If the width is narrow and wide, there may be different sizes of bricks.
Quality inspection data: Ask the developer to provide the quality inspection report or basic data of the bathroom tile, and then search the Internet to see whether the standards meet the national standards.
Tiles and Optional Tiles Zhongyu Bathroom Room Tiles Specifications
Disinfectant Liquid,Disinfectant Solution,Household Disinfectants,Hospital Grade Disinfectant
Ningbo Autrends Prevention Products Co., Ltd , https://www.autrendsafety.com