Steam trap classification introduced

Trap is used in steam pipe network and equipment, can automatically discharge condensate, air and other non-condensable gas, and water vapor leakage valve. According to the different working principle of steam traps, steam traps can be divided into the following three types: Mechanical type: Rely on the changes in the height of the condensate water vapor in the steam traps, including: Float type: Float closed hollow sphere Open up Float type: float up to open the barrel-type Open downward Float: the float is open down barrel type Static type: relying on liquid temperature changes and movements, including: bimetal: sensitive to the original Bimetal vapor pressure type: sensitive original bellows or ink cartridges, filled with volatile liquid inside Thermodynamic: Rely on the thermodynamic properties of the liquid changes. Disc type: Due to the same pressure, the flow rate of liquid and gas are different, resulting in different dynamic and static pressure to actuate the disc valve pulse: Due to the different temperatures of the condensate through the two series in series orifice Plate, sitting in the bipolar orifice between the different pressures, driving the valve action.

PCD Cutting Tool Blanks(PCD Disc)

BOHONG has world-class production facilities for PCD cutting tool blanks. BOHONG PCD is widely used for machining non-ferrous metals and alloys, such as aluminum, copper, aluminum/gray iron composites, as well as nonmetallic materials such as wood, chipboard, ceramics, plastic, rubber etc, where high abrasion resistance and good surface finish are required.

Pcd Cutting Tool Diamond Tool,Pcd Cutting Tool Blank For Insert,Pcd End Mill Tools Cutter,Pcd Solid Wood Cutting Tools

Henan Bohong New Material Co., Ltd , https://www.bohongpcd.com