Solar Backpack
 |
It is understood that solar panels installed solar panels on the side, ranging in power from 0.8 watts to 12 watts. As long as the bag is in the sun for two or three hours, it can be used to charge the portable mobile power inside the package, and then the USB cable can be used to charge laptops, mobile phones, digital cameras, radios, MP4s and other electronic products. According to the different needs of users, different packages of photovoltaic panels are not the same size, like the general girl back shoulder bag is mainly to meet the MP3, mobile phones and other small electronic devices, while the backpack's battery capacity is relatively large, you can Meet the needs of laptops and other charging.
The vibration sensor(Vibration Transmitter) is one of the key components in the testing technology of Vibration Measurement. Its main function is to receive the mechanical quantity and convert it into a proportional electric quantity. Because it is also an electromechanical conversion device. So we sometimes call it a transducer, a vibration pickup, etc.
Commonly used vibration sensors are as follows:
1. Piezoelectric resonant
The piezoelectric sheet is used to receive the vibration signal, and the resonance frequency of the piezoelectric sheet is relatively high. In order to reduce the resonance frequency, it is realized by increasing the mass of the piezoelectric sheet vibrating body, and using a spring ball instead of an appendage to reduce the two resonance frequencies and enhance the vibration effect. Its advantages are high sensitivity and simple structure. However, the signal needs to be amplified and sent to a TTL circuit or a single-chip microcomputer circuit, but it is enough to use a triode single-stage amplification
2. mechanical vibration
In the traditional vibration detection method, after being vibrated, the spring ball vibrates at a reduced amplitude for a long time, and this vibration is easy to be detected by the detection circuit. The vibration output switch signal is determined by the output impedance and the resistance value of the matching output. According to the input impedance of the detection circuit, it can be made into a high-impedance output mode.
3. Micro Vibration Sensor
The mechanical vibration sensor is miniaturized, the vibration body is carbonized and sealed, and its working performance is more reliable. The output switching signal is directly connected with the TTL circuit and or the input circuit of the single-chip microcomputer, and the circuit structure is simple. The output impedance is high, and the quiescent working current is small.
Advantages of Vibration Sensors
1. Small size and light weight. It can be applied to some vibration test systems that are greatly affected by the additional mass.
2. It has a wider response frequency range of 4Hz-2000Hz than the magnetoelectric speed sensor, and the mechanical moving parts are not easy to damage
If you have any questions about the vibration sensor, please contact us, we will provide you with professional and timely answers.
Vibration Sensor,Accelerometer Sensor,Velocity Sensor,Accelerometer Vibration Sensor
Wuxi Winsun Automation Instrument Co., Ltd , https://www.winsunwx.com