Renovation integrated ceiling correct construction process
During the renovation process, the ceiling is an indispensable part, especially in the kitchen and bathroom space, ceiling construction is an important part. Due to the kitchen fumes and the bathroom's moisture and odor, this has always been the difficulty and focus of home improvement. Different from ceilings in the living room and bedroom, which are mainly responsible for the decorative effect, the ceilings of the kitchen and bathroom space are generally quite functional. After the ceiling is completed, all the problems will be “hiddenâ€. Therefore, if the decoration process is selected, Appropriate materials, proper construction techniques, attention to details at the time of acceptance, and can reduce a lot of trouble for future life.
Correct installation sequence reduces vibration
The correct kitchen and bathroom ceiling installation sequence can reduce unnecessary vibrations. The correct installation sequence in the bathroom is to install Yuba and exhaust fans first, and then do the ceiling. Do not install exhaust fan or bathroom heater directly on the aluminum gusset plate with screws. You can use the expansion bolts to hang directly on the concrete on the top; if the exhaust hose of the exhaust fan is longer, (more than 1 meter), it is best to let workers It is fixed on the top. Otherwise, the exhaust pipe will vibrate when the exhaust fan is turned on. The fixing method is very simple. It only needs to use scotch tape to fix it.
The correct order for the installation of kitchen ceilings should be to first fix the hood of the hood and the flue, and to select the location where the hood is to be installed at the other end, and to buy the lights used in the kitchen, but do not need to install first. Then install the ceiling, then install the lights, it is best not to install large lamps directly on the ceiling.
According to the construction plan, arrange the colors of the plates in order
When installing the keel, the direction of the keel should be determined according to the design trend of the ceiling measurement construction drawing. After the determination, the keel distance and punching point should be marked on the roof, and the electric hammer should be used for drilling. The depth of punching should not exceed 4 cm. Prevents the destruction of pre-embedded wire tubes in the wall. After the punch is ready, expand the matching inner bulge into the hole. According to the height of the corners, the galvanized copper wire saw is good, into the inner bulge, according to the length of the room to cut the keel, the keel is fixed on the copper wire with a nut. The laying of ceilings should also be based on the measurement of construction drawings, the shape of the plate, the order of colors arranged in order, row plate, the pinch plate should be tight and seamless between the corners, and to indicate the control line hole.
Plates to be laid flat during transport stacking
The aluminum buckle plates, plastic steel plates or integrated ceilings and supporting keels and fittings purchased in kitchen ceilings shall meet the product quality requirements and must be inspected for bending deformation. In the process of transportation and stacking, the plates should be laid flat and not pressed, and high temperature and harmful substances should be avoided. When the keel is installed, it must be flat and the spacing deviation should be controlled within the allowable range. When installing, if the dimensions are deviated, it should be adjusted before inserting in order, and no hard insertion is required to prevent deformation.
The ceiling of pipeline laying should be equipped with manholes
Recessed ceilings must be equipped with access holes. Many people in the home decorating kitchen and bathroom ceilings generally do not have access holes and feel beautiful, but they do not know that once the pipeline equipment in the ceiling has malfunctioned, it can not be checked to determine what part, what is the reason, and even more impossible. Repair, so it is better to lay the manhole for laying pipelines or to install manholes, choose a more concealed and easy to inspect parts, and artistic treatment of manholes, such as combined with lighting or decorative items.
Ceiling Mounting Decoration Space Interior Finishing Range Hood Home Improvement Decoration Living Room Kitchen Integrated Ceiling Kitchen Ceiling Bathroom Ceiling Material Bathroom Design Bathroom Ceiling Bathroom Size Bedroom Lamps Bedroom Lamps
Led Track Light,30W Track Light,Led Cob Track Lighting,Led Track Lamp
JIANGMEN MICHEN LIGHTING CO.,LTD , https://www.jmmission.com