Range hood installed four major pain points
Many people have had this experience: carefully picking up the hood from the mall, and when they are ready to install, they find that they need to install the exhaust pipe. At this time, the kitchen has finished the ceiling, and after the master removes the ceiling, it is reinstalled. However, it was found that the effect of oil smoke is very bad. When using it, there are often cases of oil smoke refilling, hood dripping, and excessive noise. Where is the problem? Is it a problem with the quality of the range hood? Or is it a problem with the installation of the range hood? Experts remind: In addition to choosing a good range hood, there is still a large part of the problem in the installation of the range hood!
Choose a range hood with good results, pre-embed the pipe before the renovation, install the commissioner to operate the hood, and repair the public flue. This is the experience of millions of people. Four major pain points that affect the quality of life of users in the future:
Pain point 1: did not choose a really good effect range hood
What kind of range hood is a good range hood? Many users have such a personal experience: different brands of range hoods experience little difference in the mall demonstration, but when you buy it home, you will find that the gap is not a little bit!
Since the real kitchen environment is far more complex than the mall's zero-load demonstration environment, it faces multiple challenges such as the public chimney and the direction of the smoke pipe. Therefore, the really good effect range hood needs to face the real kitchen environment, master the rules of the operation of the soot, can achieve precise control of the soot particles, and completely HOLD the soot. The representative of Fangtai, which was launched this year, has the magical effect of the oil-absorbing smoke, which transforms the traditional top suction into a butterfly-wing ring suction. It also brings the beauty and practicality of the European machine to the extreme, creating a smoke that has never been seen before. Good result.
A really good-effect range hood is the premise of professional installation of the range hood. Otherwise, the installation is professional and the smoke-free environment of the kitchen cannot be guaranteed.
Pain point 2: no pre-embedded tobacco pipe
Why do you want to pre-empt the pipe before the decoration? A large number of cases show that if the household does not have a pre-embedded pipe before the decoration, it may cause poor smoke, poor kitchen noise, machine shake, etc., and will cause the whole cabinet to be installed. Beautiful. This affects both the cooking mood and the health of the body, as well as the quality of life.
Therefore, it is very important to pre-embed the pipe before renovation. At present, in the kitchen appliance industry, only Fangtai will provide pre-buried pipe service before the installation of the range hood.
Pain point 3: Non-professional installation
Due to the non-standard installation of the pipe by non-professionals, the workmanship is not fine enough, and the pipe is not properly connected, resulting in oil leakage and other problems.
Professionals are much more serious. Before the pre-embedded pipe, Fangtai service technician will first inspect the site, inspect or renovate the flue, and make a professional design for the installation position and socket position of the fume hood, so as not to be unsightly after installation. The effect is not good, etc., causing the rework to remove the ceiling or remove the cabinet.
Pain point 4: the public chimney is blocked
I have only heard of some developers compressing the green space of the community and reducing the floor space. Haven't heard of the compression of the public flue? But in fact, due to the current building codes, the requirements for the cross-sectional area and emission capacity of the flue are not clear, resulting in the current The residential flue market is rather chaotic, and some developers are cutting corners, resulting in a generally low cross-sectional area of ​​high-rise dwellings and insufficient emissions.
Since the public flue is compressed, or the high-rise is in the process of decoration, there is a block of objects falling, which can easily cause the public flue to be blocked, which may cause problems such as poor exhaust.
This aspect is more advanced than Fang Tai, such as their technicians will clean the flue before installation. The effect of the range hood is the gold signboard of the range hood, and to protect this gold signboard, the installation must be professional and meticulous.
Wire Spring,Double Torsion Spring Design,Spring Steel Wire,Stainless Steel Spring Wire
OEM order and ODM order can is welcome
wire thickness : 0.07--5mm
applicaiton: viation,automotive, motorbike, bicycle, automatic equipment, household appliance, medical device ,toy, telecommunication,computer, instrument and meter,furniture, electric tools,mold and other industries
Wire Spring,Double Torsion Spring Design,Spring Steel Wire,Stainless Steel Spring Wire
Shenzhen Lanejoy Technology Co.,LTD , https://www.wire-spring.com