Open bar decoration tips open bar decoration considerations
In this era when young people like freedom and pursue individuality, the open bar has become the first choice of young people. The open bar not only separates the kitchen from the living room, but also improves the space of the whole decoration. Let's take a look at the open bar decoration techniques and the related contents of the open bar decoration precautions.
Open bar decoration tips
1, want a relatively independent space, may wish to create a separate bar area, separate from the restaurant area. The countertops are decorated with exquisite vases, and in an elegant environment, taste the sweet red wine or espresso, with sweet pastries, the time becomes so strong, pleasant and wonderful.
2, small-sized apartment also wants to enjoy the bar, you can dine in the restaurant side cabinet, create a small bar area. No need to take up too much space, a countertop with a few high chairs, you can simply build a practical bar that integrates leisure, office and partition.
3. Transform the restaurant into a space similar to the bar area. The multi-function corner wine cabinet not only supports the value of the whole family, but also has many functions. It can collect a large number of wines and can also store all kinds of tableware. The bar is also a dining table. It is also appropriate to solve the meal of a few people.
4, small units generally choose an open-style guest restaurant, open and not crowded, if you add a partition to distinguish between different spaces, it will appear more layered. The partition cabinet + bar can be used for both storage and leisure. It is quite pleasant to read books and drink afternoon tea here.
5, the kitchen with small space can use the open design to expand the kitchen space, the bar as a partition in the open space is also a good choice, can cut off the space.
Open bar decoration considerations
1. Set up the bar in the room. The bar must be regarded as a part of the complete space, not just a piece of furniture. A good design can integrate the bar into the space. There is no specific rule for the location of the bar. Designers usually recommend using some distorted space. If the bar is integrated into the main body of space, it is necessary to consider the moving line.
2, of course, the location will also affect the circuit and water supply and drainage design, especially when it is far from the pipe or the drain pipe, the drainage becomes a big problem. The drain pipe should have a certain angle of inclination. If the bar position is close to the outdoor, the drain pipe can be connected to the outdoor and drained by a separate line; if the pipe is connected to the pipe and the inclination is insufficient, the construction must be troublesome when the pipe is to be installed from the ceiling or the wall. The cost will also increase.
3. If you want to use high-power appliances in the bar, such as induction cookers, it is best to design a separate circuit to avoid circuit tripping.
4, the bar built with the corner, the operating space needs at least 90cm, and the bar height has two sizes, the single-layer bar is about 110cm up and down, the double-bar counter is 80cm and 105cm, the gap between them must be at least 25cm, the inner layer can Place items.
5. The depth of the countertop must depend on the function of the bar. The width of the countertop required for drinking only drinks is not the same. If the seat is prepared in front of the counter, the countertop must protrude from the bar itself, so the depth of the countertop must be at least 40-60cm. The width of the bar below is also convenient for storage.
6. How long should the bar be used for easy use? Generally speaking, the smallest sink needs to be 60cm long and the operating table is 60cm. Others can be measured according to their own needs.
7. Set the sink bar to pay attention when purchasing the sink. The sink is preferably a flat bottom slot. When the cup is placed, it will not fall or be damaged. The depth of the sink is preferably 20cm or more, so as to avoid splashing and getting wet. .
8, the design of the wine cabinet should pay attention to the convenience of use, the height of each layer is at least 30-40cm, the part of the wine bottle is best designed to be placed obliquely, so that the wine can flood the stopper, so that the wine can be stored Longer; the depth of the cabinet should not be too deep, it is inconvenient to take a cup to cross other objects.
9. The countertop of the bar should be made of wear-resistant material. The skin is not suitable. The bar with the sink is best resistant to water. If the bar uses electrical appliances, the refractory material is the best, like artificial stone and beautiful board. , stone, etc., are all ideal materials.
The above is the open bar decoration technique, the detailed answer to the opening bar decoration notice, I do not know if you are satisfied with the introduction of the decoration home network Xiaobian. If you want to know more about the exciting content, please continue to pay attention to our home encyclopedia!
More related wonderful reading:
What material is the bar counter? Wine cabinet plus bar decoration considerations
Family bar decoration renderings family bar design drawing
Press Fittings produces accorindg to park ,connex ,vigea and nibco,Approved watermark
Press Fittings，press fittings，vigea press fittings，Nibco press fittings
Taizhou Runde Company , https://www.smartfittings.com