Olange: How to clean home textile sofa

For ordinary home textile sofas, Olange recommends cleaning and maintenance to pay attention to the following points:

First of all, you can usually use a dry towel to beat, at least once a week. When the sofa is regularly vacuumed, if it can be done once a week, the armrests and seat cushions of the sofa are easy to be dirty, and should be covered with a pleasing sofa towel or a large towel. The armrests, backrests and seams of the sofa must also be taken care of, but when using the vacuum cleaner, do not use the suction brush to prevent the fabric from being damaged by the woven thread on the woven fabric, and it is better to avoid the suction with a large suction force. I think this move may cause the thread to be torn off. It is better to think about cleaning with a small vacuum cleaner.
In addition, the degree of wear resistance of home textile sofas may be leather sofas, it is best to avoid sitting in the same position. If you find that the thread is loose, you can not tear it off by hand and use scissors to cut it neatly. If it is a movable mat, it is best to flip it once a week to spread the wear evenly.

Secondly, the sofa is cleaned once with a cleansing agent once a year, but the cleansing agent must be thoroughly washed off afterwards, otherwise it is more likely to be dusty. It is best to choose a special cleanser containing antifouling agents. Sheathed home textile sofas are generally clean. The elastic sleeve is not as clean as the washing machine at home, and the very large cotton or linen jacket can be taken to the laundry. When ironing the sheath, be aware that some elastic sheaths are easy to dry and iron-free. Even if you want to iron, you should think about the surface of the fabric. Therefore, the inside of the ironing jacket is more suitable, and the cotton jacket should not be ironed.

Source: GO Jiaju Furniture Network

Metal Floor Hardener
Scope of adaptation:
Warehouse, Terminal Loading Area, Machinery Plant, Aircraft Tarmac, Garages, Parking Lot, Oil Storage, Passageway, Factory Chute Deck, Reservoir Spillway, Energy Dissipation Pool, Loading and Unloading Slopes, Military Industry, Textile, Freezer, Automotive Industry , The electronics industry, highways and other concrete floor suitable for metal aggregate requirements.
Performance characteristics:
After completion of the metal aggregate wear-resistant floor has the following characteristics:
1, high wear resistance;
2, permanent corrosion-resistant;
3, reduce dust;
4, impact resistance
5, construction convenience;
6, metal aggregates have different options (such as tin-titanium alloy aggregate)

7, rich colors (cement color, green, red, gray, yellow, etc.)

Service life:
Life expectancy: with the concrete ground synchronization
Construction Technology
1, leveling the horizon leveling, the aggregate evenly spread on the leveling layer;
2, two evenly spread wear-resistant aggregate. Mention pulp and trowel
3, saw the concrete in the appropriate position, make expansion joints, and caulk;
4, curing curing the ground.

Technical Index

project		index
		Non-metallic aggregate type â…	Metallic aggregate type â…¡
Wear (gear method)		≤650	≤450
Compressive strength	3d	≥49.2	≥50
	7d	≥60	≥65
	28d	≥80	≥90
Flexural strength		≥11.5	≥13.5
hardness		7.0±0.5	8.0±0.5
Oil resistance			Three-year strength of the oil bubble is not reduced, paint <0.3mm (including impermeability)
Corrosion resistance			Standard corrosion test of aggregate, 42d natural potential constant positive, the stability value of +50 mm (S.C.E), the maximum value of +120 mv (S.C.E) cement test, 5% NaCI solution immersion, 2 years and 3 months without rust.
Skid resistance		Same as ordinary cement floor	floor

Metal Floor Hardener

Metal Floor Hardener,Red Metal Floor Hardener ,Sky Blue Metal Floor Hardener,Iron Green Metal Floor Hardener

Jiangmen Kasole Building Materials Co., LTD. , https://www.kasole-paint.com