Measures to prevent damage to hardware

Measures to prevent damage to hardware are hardware materials that are indispensable in the modern construction industry. "target=_blank>Building materials, whether it is door and window industry, plumbing industry, cabinet industry, furniture industry, decoration industry, etc., will be widely used. To hardware products, small hardware not only plays a very important role in these industries, but also has a very decorative effect, but if you install or use these products containing hardware, If you don't pay attention to it, you can cause damage to its small hardware. How to prevent damage to hardware? Today Xiaobian has compiled the following major methods for you, hope to help everyone!

Measures to prevent damage to hardware:

1. The model, specification and performance of the selected hardware fittings should conform to the current national standards and relevant regulations, and match the selected plastic doors and windows.

2. For sliding windows with a width of more than 1m, or doors and windows with double glazing, double pulleys or rolling pulleys should be used.

3, sliding hinges shall not be made of aluminum alloy material, stainless steel "target=_blank> stainless steel material shall be used.

4. To install the hardware with the fastening screws, a metal lining must be built in. The thickness of the lining should be at least twice the distance of the fastener. Do not fasten to plastic profiles or use non-metallic linings.

5, hardware accessories should be installed last, door and window locks, handles, etc. should be assembled after the window door fan is inserted into the frame to ensure correct position and flexible switch.

6, the hardware should be carefully maintained after installation to prevent rust and corrosion. In daily use, it is necessary to lightly open and close the door to prevent hard opening and damage.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn

Sliding Gate & Swing Gate

A sliding gate is a type of gate that operates by sliding horizontally along a track. It is commonly used for driveways, entrances, and other areas where a traditional swinging gate may not be practical or space-efficient.

Sliding gates are typically made of metal, such as steel or aluminum, and can be automated or operated manually. They are often equipped with wheels or rollers that allow them to slide smoothly along the track.

Automated sliding gates are controlled by an electric motor that opens and closes the gate. They can be operated using a variety of methods, including remote controls, keypads, or sensors. Some sliding gates also have safety features, such as obstacle detection sensors, to prevent accidents or damage.

Sliding gates offer several advantages over other types of gates. They require less space to operate since they don't swing open or closed. This makes them ideal for properties with limited space or steep driveways. They are also more secure and harder to force open compared to swinging gates.

However, sliding gates do have some limitations. They require a level and smooth surface for the gate to slide properly. They can also be more expensive to install and maintain compared to other types of gates.

Overall, sliding gates are a popular choice for homeowners and businesses looking for a convenient, secure, and space-saving gate solution.

Sliding Gate,Swing Gate,Security Swing Gate,Garden Gate

Anping Xinlong Wire Mesh Manufacture Co.,Ltd. , https://www.xinlongfence.com