Increase the localization of tools, steam turbine enterprises gather in Shanghai dialect future
2024-08-23 02:02:48
On October 11th, the 18th annual meeting of the national steam turbine industry gold cutting and process technology network was held in Shanghai. The annual meeting was hosted by Shanghai Steam Turbine Works and lasted for 5 days. There were 11 member units from the national steam turbine and nuclear power industry. The 50 leaders, experts and representatives attended the meeting. A total of 51 representatives from 23 domestic and foreign tool suppliers and our reporters attended the meeting.
Shen Hongwei, deputy chief engineer and director of the Shanghai Steam Turbine Works, delivered a welcome speech at the opening ceremony on behalf of the organizers, and welcomed the arrival of all colleagues. At the meeting, Shen Hongwei introduced the achievements and technical development goals of SAIC in the past year. He invited everyone to visit the steam turbine processing workshop of the steam turbine plant of Shanghai Steam Turbine Works, the general assembly of the gas turbine, the blade workshop, etc., and took photos with the representative in front of the SAIC Technology Building. Remember. Wu Tianming, deputy chief craftsman of Shanghai Steam Turbine Works, the chairman of the contact network, analyzed the market status and prospects of China's power station equipment industry in 2010, and proposed the structural adjustment of power equipment in the country, continuous optimization, and continuous improvement of the proportion of clean energy. Next, Jinqie and the process technology network should adapt to the new situation of the state's structural adjustment of power equipment, do our work well, and overcome the problems of gas turbine broaching.
At the meeting, Dongqi Chief Technician Zou Weiwen introduced the reconstruction of the Dongqi Hanwang production base after the disaster. The new Dongqi new base covering an area of ​​more than 2,600 mu has settled in Bajiaojing Town, Deyang Economic Development Zone. The heads of various enterprise crafts introduced the overall development planning, system reform, digital information management, new equipment investment, production capacity status, technical management mode and advanced tool promotion and application technology of their respective enterprises in the past year.
The National Steam Turbine Industry Gold Cutting and Process Technology Network serves as a platform for steam turbine companies to exchange process experience. It has always been highly valued by various steam turbine companies and related tool manufacturers. Not only has the number of participants increased on a large scale, but the number of tool suppliers at the conference has also increased significantly. In addition to many internationally renowned tool suppliers, the number of tool manufacturers from China has also increased. Some companies that have not attended the meeting. For example, Zhuzhou Diamond, Haliang, Hanjiang Tools and Dongguan Amelin have sent intensive strength and made detailed technical introductions. Participants generally agreed that they have access to more than 20 well-known tool suppliers at home and abroad in a short period of time, and have obtained a lot of useful information. The supply and demand sides work together to solve the cutting problems in steam turbine manufacturing, improve processing efficiency and reduce manufacturing costs. It is necessary that this approach should continue.
At the meeting, 11 papers published by technicians from steam turbine companies focused on the localization of tools, the latest processing technology for steam turbine rotors, wheels, wheel grooves and blades, the application of digital manufacturing technology, new cooling cutting technology, and advanced The experience of tool promotion and application has been discussed in depth. Some of the tool suppliers attending the conference also gave detailed explanations on the solutions of their respective products in the steam turbine processing industry. Different from the previous introduction of product performance, the explanations of the actual processing cases and the in-depth explanations were welcomed by the craftsmen of various manufacturers. Hanjiang Tools, Zhuzhou Diamond and Haliang Group, as well-known domestic tool manufacturers, also participated for the first time and brought their own excellent products and solutions in steam turbine processing.
Many companies, including SAIC, Haqi and Hangzhou Auto, pay great attention to the localization of tools, and also provide strong support to several domestic tool manufacturers, try to use these enterprises as much as possible without affecting the processing cycle. Cutting tools, some domestically produced excellent tools have entered key production links, providing strong support for the development of domestic tool manufacturers, which provides a model for machine companies in other industries. The development of domestic tool companies is inseparable from the support of user companies. Users should try to give domestic tools some opportunities. Only in this way can the company continue to grow.
Finally, the meeting identified the key issues for the next annual meeting, and decided that the 19th annual meeting of Jinchee and Process Technology Network was undertaken by Harbin Steam Turbine Works Co., Ltd. in December 2011. The 20th annual meeting was hosted by Dongfang Steam Turbine Co., Ltd. in October 2012.
Shen Hongwei, deputy chief engineer and director of the Shanghai Steam Turbine Works, delivered a welcome speech at the opening ceremony on behalf of the organizers, and welcomed the arrival of all colleagues. At the meeting, Shen Hongwei introduced the achievements and technical development goals of SAIC in the past year. He invited everyone to visit the steam turbine processing workshop of the steam turbine plant of Shanghai Steam Turbine Works, the general assembly of the gas turbine, the blade workshop, etc., and took photos with the representative in front of the SAIC Technology Building. Remember. Wu Tianming, deputy chief craftsman of Shanghai Steam Turbine Works, the chairman of the contact network, analyzed the market status and prospects of China's power station equipment industry in 2010, and proposed the structural adjustment of power equipment in the country, continuous optimization, and continuous improvement of the proportion of clean energy. Next, Jinqie and the process technology network should adapt to the new situation of the state's structural adjustment of power equipment, do our work well, and overcome the problems of gas turbine broaching.
At the meeting, Dongqi Chief Technician Zou Weiwen introduced the reconstruction of the Dongqi Hanwang production base after the disaster. The new Dongqi new base covering an area of ​​more than 2,600 mu has settled in Bajiaojing Town, Deyang Economic Development Zone. The heads of various enterprise crafts introduced the overall development planning, system reform, digital information management, new equipment investment, production capacity status, technical management mode and advanced tool promotion and application technology of their respective enterprises in the past year.
The National Steam Turbine Industry Gold Cutting and Process Technology Network serves as a platform for steam turbine companies to exchange process experience. It has always been highly valued by various steam turbine companies and related tool manufacturers. Not only has the number of participants increased on a large scale, but the number of tool suppliers at the conference has also increased significantly. In addition to many internationally renowned tool suppliers, the number of tool manufacturers from China has also increased. Some companies that have not attended the meeting. For example, Zhuzhou Diamond, Haliang, Hanjiang Tools and Dongguan Amelin have sent intensive strength and made detailed technical introductions. Participants generally agreed that they have access to more than 20 well-known tool suppliers at home and abroad in a short period of time, and have obtained a lot of useful information. The supply and demand sides work together to solve the cutting problems in steam turbine manufacturing, improve processing efficiency and reduce manufacturing costs. It is necessary that this approach should continue.
At the meeting, 11 papers published by technicians from steam turbine companies focused on the localization of tools, the latest processing technology for steam turbine rotors, wheels, wheel grooves and blades, the application of digital manufacturing technology, new cooling cutting technology, and advanced The experience of tool promotion and application has been discussed in depth. Some of the tool suppliers attending the conference also gave detailed explanations on the solutions of their respective products in the steam turbine processing industry. Different from the previous introduction of product performance, the explanations of the actual processing cases and the in-depth explanations were welcomed by the craftsmen of various manufacturers. Hanjiang Tools, Zhuzhou Diamond and Haliang Group, as well-known domestic tool manufacturers, also participated for the first time and brought their own excellent products and solutions in steam turbine processing.
Many companies, including SAIC, Haqi and Hangzhou Auto, pay great attention to the localization of tools, and also provide strong support to several domestic tool manufacturers, try to use these enterprises as much as possible without affecting the processing cycle. Cutting tools, some domestically produced excellent tools have entered key production links, providing strong support for the development of domestic tool manufacturers, which provides a model for machine companies in other industries. The development of domestic tool companies is inseparable from the support of user companies. Users should try to give domestic tools some opportunities. Only in this way can the company continue to grow.
Finally, the meeting identified the key issues for the next annual meeting, and decided that the 19th annual meeting of Jinchee and Process Technology Network was undertaken by Harbin Steam Turbine Works Co., Ltd. in December 2011. The 20th annual meeting was hosted by Dongfang Steam Turbine Co., Ltd. in October 2012.
The Jigsaw is the wood working power tools, Perfect for cutting curve, hole digging,can cut 3cm circle.
Quick Clamp Chuck Portable Jig Saws With Laser is used for Cutting Wood, Plastic Tube, Aluminum Bar, with 6 speed 0-3000rpm, 4 Pendulum Settings, Bevel Cutting 45°, 20mm Stroke Distance, With Aluminum Base, and Laser Function.
No burrs with good blade.
Portable Jigsaw With variable speed, 0-3000rpm, for different material cutting.
The Jigsaw can cutting Capacity: Wood:80mm, steel:10mm
The Jig Saw with 4 Pendulum, 0 setting for metal, 1 setting for wood, 2-3 setting for soft wood.
Normal clamp chuck or quick clamping chuck is optional.
Iron base or Aluminum base is optional
Hand Jig Saw with a counterbalanced low-vibration plunge mechanism
Power Saw With a dust blower for max cut-line visibility.
Wood Cutting Power Tools with protection button for your safety, soft rubber handle for comfortable use.
The external laser function for better cutting line ability.
The Jig Saw is equipped with Guide ruler, to control the cutting width.
CE/GS/EMC/UKCA certificate.
Jig Saw,Cordless Jig Saw,Power Jig Saw,Power Jigsaw,Portable Jig Saw
Ningbo Brace Power Tools Co., Ltd , https://www.bracepowertools.com