Hyperlox fine wear resistant high performance coating
2024-06-19 10:05:21
Hyperlox coating is the ideal solution for gear cutter products from Tianwei Saili Coating Co., Ltd. The coating has a smooth surface without droplets, a fine coating structure, excellent toughness, high hardness and red hardness, ideal oxidation resistance and strong bonding force. In dry or coolant-cutting environments, Hyperlox Suitable for processing difficult to cut materials. The anti-shedding smooth surface, fine coating structure, high toughness and good toughness, high oxidation resistance and thermosetting properties make the high-quality coating excellent. The high adhesion of the Hyperlox coating is suitable for large cutting forces. Excellent processing ensures no droplet formation under cathodic vacuum magnetron sputtering. It fundamentally ensures the ideal smoothness of the surface, making the coating material work well with the tool.
The PVD coating has been used for nearly 10 years since the initial attempt to establish a thick coating, and in particular the technology has been successfully applied to indexable inserts. The "thickened" PVD coating produced by CemeCon is a standard coating. For special tool types, the company chose ALOX SN2 and ALOX SN2 gold coating materials. On the one hand, after thick coating, the tool base is protected from the adverse effects caused by high temperature and other factors during processing. Secondly, the thickness of the coating is doubled, and the service life of the tool can be extended by 100% under the same application conditions. In the future, this research and development can be applied to the turning and rough milling of ordinary steel and gray cast iron parts. ALOX SN2 can be used in rough-processed CemeCon coating materials. By using CemeCon coating on the insert, the blade has almost no residual stress, and the high coating thickness of the insert becomes an achievable reality. In order to ensure the stability of the blade, ALOX SN2 provides high wear in the roughing of steel and cast iron materials. In the milling process for automotive crankshafts, the coating can achieve good results, and the coating can be based on The customer requires a gold surface.
The PVD coating has been used for nearly 10 years since the initial attempt to establish a thick coating, and in particular the technology has been successfully applied to indexable inserts. The "thickened" PVD coating produced by CemeCon is a standard coating. For special tool types, the company chose ALOX SN2 and ALOX SN2 gold coating materials. On the one hand, after thick coating, the tool base is protected from the adverse effects caused by high temperature and other factors during processing. Secondly, the thickness of the coating is doubled, and the service life of the tool can be extended by 100% under the same application conditions. In the future, this research and development can be applied to the turning and rough milling of ordinary steel and gray cast iron parts. ALOX SN2 can be used in rough-processed CemeCon coating materials. By using CemeCon coating on the insert, the blade has almost no residual stress, and the high coating thickness of the insert becomes an achievable reality. In order to ensure the stability of the blade, ALOX SN2 provides high wear in the roughing of steel and cast iron materials. In the milling process for automotive crankshafts, the coating can achieve good results, and the coating can be based on The customer requires a gold surface.
Hubei Chengze Diamod Products Co., Ltd. , https://www.ryomaltools.com