German machinery and equipment manufacturing is expected to recover further

Abstract In 2010, the production of mechanical equipment manufacturing in Germany increased by 8.8%, and will continue to maintain a prosperous situation in 2011. The Industry Association (VDMA) revised expectations for the 2011 outlook. Thomas Lindner, president of the association, said in Frankfurt recently...

In 2010, German machinery and equipment manufacturing production increased by 8.8%, and will continue to maintain a prosperous situation in 2011. The Industry Association (VDMA) revised expectations for the 2011 outlook. The association's president, Thomas Lindner, said in Frankfurt recently that the German machinery and equipment industry will continue to maintain a strong momentum. It is expected that the industry's production growth will reach 10% in 2011, compared with the earlier forecast of an increase of 8%.

The machinery and equipment manufacturing industry is a pillar industry in Germany, including many medium-sized enterprises and large listed companies such as Thyssen Knub, GEA and Gitmai, with a total employment of more than 900,000 people. Due to the economic crisis, the industry has laid off more than 9,000 people in 2010. With the recovery of the industry, there will be an increase of 20,000 jobs in 2011.
 

Elevator Door System

Elevator doors have two major types, manual and automatic. Manual doors are normally opened and closed manually by hand, and automatic doors are the standard type of doors found in modern days elevators, usually powered by a door operator.


Non-automatic/manual doors


These doors are normally opened or closed manually using hands, although some of them close automatically. Most older and small European elevators from the 1950's to 1970's are using manual hinged door (similar to normal room doors), while the inside has a manual sliding scissor gate or often there is no door at all. For manual doors, sometimes the door can be spring loaded so the gate can't be left open, or the gate can automatically close when you press the button, and partly/completely close when the elevator gets to a floor. The inside door can also be a tubular gate, which is a gate that in many cases folds around the side of the cab when it is open (often called a barred gate by elevator enthusiasts, though this is likely not the actual term), and which can be automatic or manual.

These type of door is still used today, normally for smaller wheelchair lifts or home elevators. Some older freight elevators may have a horizontal or vertical manual doors. In some Asian countries, one may find an old freight elevators with manual accordion or scissor gate. Some old elevators may have a semi-manual doors a configuration of manual door outside and an automatic door inside.

Swing Door S003 S004 Jpg

Automatic doors


Automatic doors are the standard type of doors found in modern days elevators which was introduced in 1887. Almost all the automatic doors are usually powered by a door operator installed on the elevator car. Those except manual door with automatic door opening/closing device and all the incline elevators with every independent door operator belongs with every single shaft doors and car doors.
Bst Door Operator

Elevator Door System,Liftshop Elevator Door Systems,Elevator Door Locking System,Automatic Elevator Door System

Suzhou Keffran Parts Co.,ltd , https://www.keffran-elevatorsmart.com