Circulating water vacuum pump maintenance

Circulating water vacuum pump maintenance 1. Normal working bearing than the ambient temperature is high 15 ℃ -20 ℃, maximum not allowed to exceed 55 ℃ -60 ℃ :, the normal working bearing should be loaded 3-4 times a year. Clean the bearings at least once a year and replace the lubricant holders. 2. Always check the water ring vacuum pump bearings work and lubrication. 3. In the case of packing seals, the packing should be compacted regularly. If the packing can not guarantee the required sealing performance due to wear, new packing should be replaced. British Prime packing vacuum pump can not be pressed too tight. Normally packed packing, allowing water to drip out, to ensure cooling and to enhance tightness. 4. If the parking time is more than one day, you must release the water from the pump and water separator to prevent corrosion. 5. Circulating water vacuum pump if the mechanical seal, the phenomenon of leakage should be checked mechanical seal static and static ring is damaged, or the seal has been aging, in case of the above, are required to replace the new parts.

Planetary Screw & Barrel

Planetary Screw Barrel,Planetary Screw Cylinder,Planet Screw And Barrel,Planetary Screw And Barrel

Zhoushan Jinmao Machinery Manufacturing Factory , https://www.jinmao-machinery.com