Ceiling design drawings to appreciate the ceiling with the skills
Ceilings occupy a pivotal position in the decoration of the whole house. Therefore, in the selection of ceiling decoration materials, we must not only adhere to the principle of beauty and firmness, but also adhere to the principles of sound insulation and environmental protection. Therefore, it can not only beautify the indoor environment, but also create a quiet privacy space of its own. So what should pay attention to the ceiling design ?
Ceiling collocation knowledge
One, ceiling style:
1, flat type
Plane ceiling is the surface without any shape and level, this top structure is flat, simple, neat and generous, the material is also compared with other forms of ceiling for the province, applicable to all kinds of bedroom ceiling decoration. It is commonly used to splicing various types of decorative panels. It can also be used for brushing, spraying, wallpapering, and wall coverings. (Recommended gypsum board splicing for latex paint, easy to deal with joint cracking) Splicing with wood board must be in strict handling of the interface, be sure to use glue or epoxy resin in water treatment.
2, bump type (usually called modeling top)
The concave-convex suspended ceiling refers to a suspended ceiling with a concave or convex structure on the surface. This type of suspended ceiling is complex and rich in change, and has a strong sense of tiers. It is suitable for top floors such as halls, halls, and restaurants. It is often used with luminaires (chandeliers, ceiling lamps, downlights, spotlights, etc.).
3, suspended
Suspension is a type of suspended ceiling in which various plates, metals, glass, etc. are suspended on a structural layer. This kind of smallpox is full of dynamic changes, giving people a fresh and beautiful sense of beauty, commonly used in hotels, concert halls, exhibition halls, video halls and other ceiling decoration. Often through a variety of lighting to produce a unique shape, filling the overflow of light and artistic interest.
4, well format
The well format suspended ceiling is a type of suspended ceiling that uses a false-beam beam made from a sculpted beam or shaped for the top surface. With lamps and single or multiple decorative lines to decorate, enrich the shape of the ceiling or a reasonable partition of the room.
5, glass type
The top surface of the glass is made of transparent, translucent or stained glass as a form of the top surface of the room. This is mainly for the purpose of lighting, viewing and beautifying the environment to form domes, flat tops, and folding tops. Gives people a bright, fresh, indoor magical feeling.
Second, the ceiling with the popular trend:
1, light steel keel plaster board ceiling
Gypsum board is made of cooked gypsum as the main raw material mixed with additives and fibers, with light weight, heat insulation, sound absorption, non-combustible and sawability and other properties. Gypsum board and light steel keel (pressed by galvanized sheet steel) combined to form a light steel keel gypsum board. Light steel keel gypsum board ceilings have a variety of types, including gypsum board, decorative gypsum board, fiber gypsum board, hollow gypsum board strips. There are many specifications available on the market. From the current point of view, the use of light steel keel plaster ceilings as a partition wall is used to make smallpox.
2, gypsum board ceiling
Mostly used in commercial space, the general use of 600x600 (mm, the length of the project did not indicate the unit, the unit is in mm) specifications, there are clear bone and dark bone points. Keel often uses aluminum or iron.
3, splint smallpox
It is commonly used for renovation. The plywood (also called plywood) is made by steaming and softening the logs, cutting large sheets along the annual rings, and drying, arranging, gluing, forming, hot pressing, and sawing. With light material, high strength, good elasticity and toughness, impact resistance and vibration. Easy processing and finishing, insulation and other advantages.
Doing ceilings generally use 5 PCT splints. 3% is too thin and easy to arch, 9% too thick. The reason for its popularity is that it can easily create a variety of modeling ceilings, including curved, round, and square. But there is a drawback: afraid of termites. The remedy is to spray termite-resistant potions. When the splint ceiling paint is used for some time, it may be lost. The method is to paint the varnish (varnish) before the decoration, and then do another process after it is dried. Another drawback of the splint is that the interface will crack. The method is to use the atomic ash to make up the interface during the renovation.
4, aluminum honeycomb perforated sound-absorbing board smallpox
Its structural structure is a perforated panel and a perforated back panel, which is directly bonded with an aluminum honeycomb core by an excellent adhesive to form an aluminum honeycomb sandwich structure, and a layer of sound-absorbing cloth is attached between the honeycomb core and the panel and the back panel. Since the honeycomb core in the honeycomb aluminum plate is partitioned into a plurality of closed cells, air flow is blocked, acoustic waves are hindered, the sound absorption coefficient is improved (reaches 0.9 or more), and the strength of the plate itself is increased, so that the size of the single plate can be To do more, further increase the design freedom. According to the acoustic design of the room, different perforation rate designs can be made, and the sound absorption coefficient of the combined structure can be controlled within a certain range, so that the design effect can be achieved and the cost can be reasonably controlled.
Through the control of perforation aperture, hole pitch, and according to customer requirements to change the perforation rate, the maximum perforation rate <30%, the aperture is generally selected ∮2.0, ∮2.5, ∮3.0 and other specifications, backplane perforation requirements and the same panel, sound-absorbing cloth used High-quality non-woven materials such as sound absorption. Applicable to subway, theaters, radio, television stations, textile mills and sound-absorbing plants and stadiums and other large public buildings, sound-absorbing wall panels, ceiling panels.
About the ceiling design drawings should pay attention to what related information for everyone to introduce here, I hope this article helps everyone. If you still have something you don't understand, you can leave a message to Xiaobian at the bottom. We will answer your questions as soon as possible.
Gypsum board ceiling classification
How to install and install the gypsum board ceiling
Integrated ceiling how to choose integrated ceiling shopping skills
Advantages and Disadvantages of Selecting Light Steel Keel for Light Steel Keel
Decoration partition decoration style partition door TV wallpaper painted wall glass door restaurant ceiling
High-power gear motors provide unparalleled speed and torque performance, durability and high-performance energy-saving operation. Their excellent performance has been widely used in various application fields. Their accuracy and torque can well meet customer needs. It is an entry-level equipment that provides simple and effective transmission solutions specifically for your application.
Gear reducer motor, micro motor, mini motor
Changzhou Yuanwang Fluid Technology Co., Ltd. , https://www.ywfluid.com