Brass Square Luxury Shower Heads

Preface

1. The back cover of showerhead could change from brass into SUS304, if you'd like to save cost (front cover still use brass, back cover use SUS304).
2. Air function or LED function could be added in any normal showerhead.
3. All colors is available, such as black,  brushed nickel, antique copper,etc.
4. The plating of surface can meet 48hours acid salt spay test, usually we quote price based on 24hours acid salt spay test.
5. Semi-finished showerhead is  available for sold.
6. ANLIN provide free laser service, if quantity is higher than 1000pcs/item (trademark authorization letter needed)
7. Besides brass & SUS304 showerhead, ANLIN also produce built-in covers, shower hose, sliding bar
8. OEM & ODM is welcomed













 































 

 

KSNFJ is a factory ready-mix powder that has undergone strict quality control to facilitate on-site construction. It contains a selection of metallic mineral aggregate materials and specialty Portland cement, as well as special additives to promote construction performance. Specially made materials ensure gradation and free from impurities, which aggregate shows good conductivity and wear resistance.

KSNFJ for the need to improve the wear resistance, resistance of the concrete surface, in particular, sparks, antistatic areas. For example: flammable warehouse, chemical plants, petrochemical plants, dangerous products workshop, gas stations, liquefied gas stations, hangars, textiles, electronics, paper, printing and other long-term electrostatic regions.

Product Advantages:

1. To make the ground extremely hard, wear and impact resistance

2. With the concrete surface to form a monolithic bond

3. Fireworks conductive static

4. Anti-all kinds of oil, grease erosion

5. Easy to construct

Material properties:

Wear resistance: The KSNFJ-treated concrete floor exhibits at least three times more wear resistance than the untreated concrete floor.

Electrical properties: KSNFJ shows good electrical conductivity to dissipate static electricity. KSNFJ can be grounded in the traditional way with specific requirements. Due to the ductility of metallic materials in the ground so that the impact of metal collision with a high degree of fireworks.

Surface resistance: 1.0×105 ~1.0×108Ω

Compressive strength: Using the same amount of water as the actual construction, KSNFJ test block 28 days standard compressive strength of 90Mpa.

Storage: KSNFJ and Curing Agent intact packaging stored at room temperature and dry environment, the storage period of six months.

Health and Safety: The cement powder contained in KSNFJ will adversely affect the skin during normal use. When the product is mixed with dampness, the released alkali will damage the skin, irritate the eyes and respiratory system, avoid inhalation of its powder, and avoid skin and eye contact. Wear suitable gloves and eye protection. Once touched the skin, wash with water. Once you reach your eyes, immediately wash with plenty of water and seek medical treatment.

 â‰¤3.1

Project	Performance
Compressive strength (3 days)	≥40Mpa
Compressive strength (28 days)	≥90Mpa
Bending strength (28 days)	≥13.5Mpa
Non burning, do not explode, not flammable
Fire class	A1 level
Wear resistance(750g/500r)	≤0.03g/㎝2
Hardness (Mohs)	≥7
Surface strength (indentation diameter mm)
Oil resistance  oil seepage	＜0.3mm
High temperature	+200℃
Freezing type	-40 ℃ (Freeze-thaw 25 times after the specimen without cracks, corner off defects, the rate of strength loss
Bond strength(28days)	≥2.0Mpa
Skid resistance (wet and dry friction coefficient)	≥0.5
Air cleanliness	N7 ~ N9 level

Green No harmful radioactive, no harmful volatiles, no pollution

Non-Flammable Ground Hardener

Non-Flammable Ground Hardener,Non-Flammable Carborundum Floor,Anti-Static Carborundum Floor

Jiangmen Kasole Building Materials Co., LTD. , http://www.kasole-paint.com