Axis, plane, direction skills
| Home>Bearing knowledge>axis, plane, direction skills |
Axis, plane, direction skills
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
The theoretical axis of rotation of the rolling bearing; the radial bearing, ie the inner ring axis; the thrust bearing, the shaft axis.
2. Inner ring (shaft) inner ring (shaft washer) axis
The inner cylinder of the inner ring (shaft ring) or the inner cylinder of the conical hole or the axis of the inscribed cone.
3. Outer ring (housing) outer ring (housing washer)axis
If the outer and outer surfaces of the outer ring are cylindrical; the axis of the outer cylinder of the outer and outer surfaces is the outer axis of the outer ring; if the outer surface is spherical, the outer surface of the outer ring is circumscribed; The line on the reference end face of the outer ring; the axis of the outer ring.
4. Conical inner ring (outer ring) axis line cone (cup) axis
The axial line of the inner ring (outer ring) of tapered roller bearings.
5. Radial plane
A plane that is straight to the axis of the axis; a plane parallel to the reference plane of the ferrule or the tangential surface of the back of the gasket; can be considered as a radial plane.
6. Radial radial direction
The direction of the axis through the axis in the radial plane.
7. Axial plane
The plane that accommodates the axis of the shaft.
8. Axial axial direction
Parallel to the direction of the bearing axis, straight to the ferrule reference end or the back of the washer; can be considered axial.
9. Radial (axial) distance
The interval measured in the radial direction (axial direction).
10. Touch angle (nominal contact angle)
The angle between the plane (radial plane) that is straight to the bearing axis and the resultant effect line (nominal effect line) that is transmitted to the roll through the bearing ring or washer.
11. Nominal touch point
When the bearing parts are in normal relative orientation; the points of the rolling body and the raceway are touched.
12. Ferrule (washer) reference end face reference face of a ring (a washer)
The bearing manufacturer specifies the end face of the ferrule (gasket) as the reference surface; it can be used as a reference for measurement.
Recommend to friends comments close window
| Bearing related knowledge |
| Sliding bearing skill specification (2) Factors affecting bearing life and several aspects of rolling bearing measurement that should be considered when selecting a bearing clearance Damage to excessive use of SKF imported bearing grease |
This article links to http://
Please indicate the bearing network http://
Previous:Maintenance Specifications for Radial and Thrust Bearings Next:High-function Ceramic Bearing Skills
Cartoon Shape Tape Measure is specially designed for kids. It is designed to be cartoon animal shape with a retractable mechanism. Case is very cabinet and light, and edge of tape is sleek, there is no glitch. Regarding the material of case there are 2 types. One is in ABS plastic, another is in plush. All materials are eco-friendly, the lead content of tape is less than 5 ppm. Therefore you can rest assurance to purchase this tape measure.
About Material
The tape measure is made of ABS case, PVC coated fiberglass. All the materials are eco-friendly, which pass ROHS and EN-71 tests. The lead content is less than 5ppm.
About Case Color
Case colors can be customized according to pantone code.
About Custom Logo
Custom logo is available.For 1-2colors logo, we will use silk printing
For full color logo, we will print it with heat transfer printing ,
And we also make normal sticker or epoxy plate logo sticker for single color or full color logo
For Plush covered item,we can make embroidry logo
About Tape Colors
Standard tape colors are in white and black
We can make pink, green or other colors.
Full color design is available too.
About Tapeline Size
The standard length is 150cm/60inch and 100cm/40inches
We have longer one in length of 180cm/72inch and 200cm/79inch, and the maximum length is 214cm.
The maximun length for the square shape item is 1.5M/60inch,
Tape width is 7.5mm.
Cartoon Mini Tape Measure, Mini Cartoon Tape Measure, Animal Tape Measure for Kids, Plush Animal Tape Measure
Wintape Measuring Tape Company , https://www.wintapetape.com