What should be done by Caiwa mechanical electrician everyday?
2023-06-16 11:12:03
Last week, Sichuan customers and their company electricians went to our factory for a design plan for Caiwa machinery production site circuit. Caiwa machinery is a type of large-capacity equipment that uses three-phase electricity. The layout of the line is very important. To ensure the normal operation of the equipment, workers' personal safety must be ensured. But the most important point is that many people do not understand how such a line should be designed.
Our factory welcomes all customers to visit the factory to investigate and solve any problems encountered in production. Before guiding the circuit design, we must first share with you the principles of circuit design and some of the work that electricians usually do.
1. The electrician must be familiar with the types and performance of electrical wiring and electrical equipment in the tile-making machine shop, and the performance of the electrical equipment is not fully understood and it is forbidden to take risks.
2. Electricians should regularly check the condition of the equipment such as cables, motors, and electric consoles. The problems found during the inspection must be dealt with in a timely manner. When checking the temperature of the motor, first check that there is no electricity, and then test with the back of the hand.
Third, in addition to temporary construction of electricity and temporary measures to use electricity, it is not allowed to private temporary wire, do not allow random hanging lights, electrical appliances, instrumentation tools and welding machines and other security switches and outlets should be used, the original electrical lines shall not be arbitrarily changed.
Fourth, according to the provisions of the regular maintenance and repair of electrical equipment, electrical equipment must be completely removed lines.
5. Some equipment that is subject to blackout operations shall be reliably and temporarily covered with dry wood rubber or insulating materials.
6. When using electric tools, you should protect against electric shock.
7. When using the ladder, the angle between the ladder and the ground should be 60 degrees. When using the ladder on the concrete floor, there should be anti-skid measures and someone should be watching.
8. When any conductive part of the equipment is found to be earthed, the power supply shall be cut off immediately. Before cutting off the power supply, except for those who rescued the electric shock, they must not be allowed to approach and leave the area 4 meters away and the room 1.8 meters away to prevent damage from stepping voltage.
Nine, in the repair of tile machine equipment, pull down the switch and the knife, must be put on the switch and knife at the "prohibited the contract, there is work" warning signs, in the live equipment on the barrier and the passage of the passage, A "stop, high-pressure danger" warning sign should be hung.
Our factory welcomes all customers to visit the factory to investigate and solve any problems encountered in production. Before guiding the circuit design, we must first share with you the principles of circuit design and some of the work that electricians usually do.
1. The electrician must be familiar with the types and performance of electrical wiring and electrical equipment in the tile-making machine shop, and the performance of the electrical equipment is not fully understood and it is forbidden to take risks.
2. Electricians should regularly check the condition of the equipment such as cables, motors, and electric consoles. The problems found during the inspection must be dealt with in a timely manner. When checking the temperature of the motor, first check that there is no electricity, and then test with the back of the hand.
Third, in addition to temporary construction of electricity and temporary measures to use electricity, it is not allowed to private temporary wire, do not allow random hanging lights, electrical appliances, instrumentation tools and welding machines and other security switches and outlets should be used, the original electrical lines shall not be arbitrarily changed.
Fourth, according to the provisions of the regular maintenance and repair of electrical equipment, electrical equipment must be completely removed lines.
5. Some equipment that is subject to blackout operations shall be reliably and temporarily covered with dry wood rubber or insulating materials.
6. When using electric tools, you should protect against electric shock.
7. When using the ladder, the angle between the ladder and the ground should be 60 degrees. When using the ladder on the concrete floor, there should be anti-skid measures and someone should be watching.
8. When any conductive part of the equipment is found to be earthed, the power supply shall be cut off immediately. Before cutting off the power supply, except for those who rescued the electric shock, they must not be allowed to approach and leave the area 4 meters away and the room 1.8 meters away to prevent damage from stepping voltage.
Nine, in the repair of tile machine equipment, pull down the switch and the knife, must be put on the switch and knife at the "prohibited the contract, there is work" warning signs, in the live equipment on the barrier and the passage of the passage, A "stop, high-pressure danger" warning sign should be hung.
Woltman Bulk Water Meter,Bulk Water Meter,Bulk Flow Meter Price List,Ultrasonic Bulk Water Meter
Shandong Chenshuo Meter Co., Ltd. , https://www.chenshuometer.com