What is the difference between the tool cart and the tool cabinet?
Abstract: Tool cabinets and tool carts are suitable for the fixed management of tools, tools and parts in the production site, so that your item access work is truly punctual, accurate, efficient and low-cost. The following is a detailed introduction to the use of tool carts and the difference between tool carts and tool cabinets. Let's take a look at the relevant knowledge! Hope can help everyone.
[Tool Cart] The difference between the tool cart and the tool cabinet
utility vehicle
Tool cart use
The tool cart is suitable for the fixed management of tools, tools and parts in the production site, so that your item access work is truly punctual, accurate, efficient and low-cost.
Structural features
1. High-intensity result design and powder surface treatment process can adapt to the more complicated work tool car environment of the factory.
2, equipped with high-quality bearings and guide rails, to ensure that the drawer can easily open and close when subjected to the rated load.
3. According to the needs, you can freely choose to configure drawers of different heights to fully meet the needs of the production site.
4. It can be equipped with a top frame with oil-proof rubber pad to protect the placed items from damage and prevent the items from slipping.
5, the lock is advanced, only use a lock to lock all the drawers to ensure the safety of the items.
6. The bottom of the cabinet is equipped with a footrest to protect the cabinet from damage when placed or moved, which is convenient to carry by forklift. A variety of surface colors to meet the needs of the overall layout of the production site
7. Full width aluminum alloy drawer handle and replaceable label, beautiful, convenient and practical.
8. The advanced drawer safety buckle design ensures that the drawer will not accidentally slide out after being closed.
9. There are 4 international standard colors to choose from (ral5005, ral5015, ral6011, ral7035), to meet the needs of the overall layout of the production site.
10. Using international advanced level locks, all drawers can be locked with only one lock to ensure the safety of the items.
11. The bottom frame and high-quality casters are implemented smoothly and have good directionality. The brakes will not slide after being fixed.
12. Advanced interlocking device, when the drawer is opened, the other drawers are automatically locked and cannot be opened, preventing the drawer from being tilted due to the full opening of the drawer.
13. The work surface of the tool cart is uniquely injection molded and has higher strength.
14. The central lock adopts a ring-shaped key structure to extend the service life of the lock.
15. The four corners of the tool cart are equipped with anti-collision strips made of new composite materials, which can effectively buffer the damage caused by accidental collision.
16. Heavy-duty wheels for tool carts, 125mm diameters are easier to cross obstacles.
17. The countertop has a special small groove, which can be used to hold liquid such as butter for convenient use.
18. A wide range of tool modules can be stored in the drawer of the tool cart.
19. The sides of the drawer are equipped with superimposed ball slides for excellent smoothness.
20. Each drawer of the tool cart has a self-locking function.
21. The two sides of the tool car are made of double-layer steel plate with mesh plate inside the mesh plate to make the car body stronger and durable.
The difference between tool cart and tool cabinet
The tool cart is a movable tool cabinet that is suitable for safe and reasonable transport of tools and accessories at the production site.
The tool cart consists of various types of tool cabinets that add moving parts such as top cabinets and casters.
The height of the tool's exterior dimensions: the heavy-duty tool cart adds 140mm to the height of the selected tool cabinet; the light-duty tool cart adds 80mm to the height of the tool cabinet.
The high-strength structural design and cathodic electrocoat primer surface treatment process can adapt to the more complex working environment of the factory.
Editor in charge: Zhao Hongli
The Elevator Cabin System is generally composed of cabin bottom, cabin wall, cabin roof, cabin door and other main parts. It is the cabin body part used by the elevator to carry passengers or goods and other loads. With the development for several years, our company has stored more than twenty kinds of patterns. We just choose some of them to show here for your reference. China Elevator Cabin System, Cabin Service Controller manufacturer, high quality Passenger Cabin System, Elevator System, etc.
Elevator Cabin System,Cabin Service Controller,Passenger Cabin System,Elevator System
Suzhou Stable Trade Co., Ltd , https://www.stable-elevator.com