What are the tricks for custom-made closet tricky JS tricks?
A netizen broke the news because he wanted to give his own locker room decoration. After some selection, he chose a whole wardrobe store to measure the door. After the master arrived at the door, the next day he sent the wardrobe design and deposit receipts. The netizen had kept his eyes open. He copied a copy of the calculated area data. He planned to calculate it first and then pay the deposit. The result was a calculation that really found the problem. The master surveyor did not know whether he was busy making mistakes. Actually, the area of ​​the small counter was counted as the area of ​​the entire wardrobe door. The door with a height of 60 cm became 2.55 meters. This way, the price of the closet was also a lot more expensive.
Victory Pine Wood Furniture     Uniform solid wood furniture
â—† Customized wardrobe area algorithm is complex, understand clearly without losing
In general, the calculation method of the custom-built closet area is calculated by the projected area and calculated by the expanded area. The projected area is an early pricing method. According to the length, width, height and multiplication of the cabinet body, the price is calculated. The depth is generally calculated according to the standard size of 6 cm. This calculation method ignores the amount of material in the cabinet and is relatively rigid. However, the accuracy of the calculation is relatively high.
According to the calculation of the area to be developed, this pricing method requires that the design be determined before purchase, and the actual material area calculation is used, that is, the calculated area of ​​the cabinet, cabinet door, cabinet board, etc., although it is accurate, but it is computationally complicated. Measurements also have some errors. This pricing method is lower in terms of unit price than projection calculations, but the final total price appears to be higher than the total budget price.
According to a survey report, about 57% of the use of the unfolded area is calculated in the custom closet, and about 39% of the area is calculated using the projected area, of which 4% is calculated by the delay meter, and the denomination meter is generally used for the cabinet calculation. Therefore, it is less used in custom wardrobe pricing.
â—† custom wardrobe more than tricky, JS tricks what?
As more and more consumers choose customized wardrobes, various consumer traps regarding custom wardrobes are gradually exposed. A certain brand of wardrobe agents revealed that some merchants will use sophisticated computing methods to deceive consumers, and this trick is even more difficult to prevent.
1. Many people think that it is more convenient and less expensive to calculate according to the projected area. In fact, no matter what kind of calculation method is used, there is absolutely no way to save money. Some JS will introduce to consumers that the calculation of the projected area is more cost-effective, but in the actual production process of the closet, consumers want to add a shelf, a hook, a slide, and other accessories. Without first talking about these, it is inevitable that JS will sit down.
2. Sitting on the ruler is a trick that many JS will use, especially when calculating the area, when three or five items are added, the complex algorithm makes it easy for consumers to get confused. Therefore, consumers must verify the data provided by the merchant. If there are two drawings, one no problem does not mean that the other one is not a problem, and complicated drawings cannot be taken care of.
Watch out for details, and go home with your favorite custom wardrobe
In addition to being wary of “area traps†when consumers purchase custom wardrobes, other small details can not be ignored. Only by considering various things in advance, can you move your favorite wardrobe back home.
1, choose environmentally friendly materials
In general, the main material of the custom wardrobe is mainly wood and board. The solid wood closet is made of solid wood. The price per square meter is more than four or five hundred yuan, and some even cost thousands. The selection of solid wood closet is expensive, and the environmental performance is also relatively good, but the solid wood custom closet is still a small number, because the production process of the solid wood closet is not very mature, and the solid wood material has high water content, and it will inevitably appear cracking after being used for several years. phenomenon.
The plates used in custom wardrobes are mostly MDF plates and wood grain plates. Both PKs have advantages and disadvantages: the weight of the MDF is good, the pressure capacity is good, it is not easy to deform, and the edge seal is not easy to open the rubber; although the solid particle board is slightly inferior in the above functions, the environmental protection, moisture resistance, nail holding power, etc. It is even more superior.
2, accessories quality can not be ignored
Nowadays, a variety of brands, styles, custom wardrobes are dazzling, and the price is also very different. One-point price points, consumers buy custom, we must value the wardrobe's cost-effective, good quality wardrobe can avoid many of our troubles in the process, and a variety of wardrobe accessories is the best quality wardrobe Mapping. In the purchase of custom wardrobe hooks, slides, shelves and other accessories to try to pick good quality. Take the wardrobe sliding door, the poor quality of the sliding door is prone to derailment, insufficient smooth, excessive noise and other issues, and a good wardrobe with a certain weight of the door, sliding will not vibrate, smooth texture.
3, buy products = buy services
There are many custom wardrobe procedures, and the factors for human involvement are throughout. When purchasing a custom closet, in addition to the quality of the product itself, the design is reasonable, the related services that the merchant can provide are also important criteria for consideration.
There are a series of service points for custom closets ranging from preliminary communication, door-to-door size, to post-installation, quality assurance, etc. Custom wardrobes are not only products but also services. During the customization process, buyers and sellers are in frequent contact with each other. A well-served shopping guide can take the initiative to answer questions about materials and pricing. A well-designed designer will listen carefully to your design needs and make a reasonable and efficient wardrobe design. Personnel must carefully measure and carefully record. On the one hand, these services can be understood through prior communication. On the other hand, it is also necessary to make observations and determine whether the company's services are trustworthy.
The service is also reflected in the custom closet put into use. As a customized product, after-sales service needs more attention than finished furniture. For example, there are problems such as non-compliance of dimensions, installation defects, etc. Service-oriented brands will be resolved quickly and will not drag the problem or push the blind responsibility to consumers. At the same time, the general wardrobe warranty in the market is 3-5 years, and the big brands generally have a shelf life of 5 years. However, it should be noted that five-year shelf life generally refers to cabinets or door panels, and the shelf life of hardware is often only one year.
JS Common Freckle Furniture Purchase Sofia Wardrobe Door Prices Furniture Wood Furniture Decoration Design Cupboard Door Cabinet Cupboard Door Cloakroom Size
Toughened Kitchen Splashback Glass
Glass kitchen splashbacks are ideal for messy areas so especially suited in a kitchen which is of course prone to food splashing. Easy to wipe clean these splashbacks will look as good in ten years as they did on day of installation. So in order to keep pretty, some people choose back painted Tempered Glass with one color, and now more and more choose choose design printed tempered glass too for kitchen splashbacks. Designer kitchen splashback that will make a stunning finishing touch to your kitchen. Easy to clean and fit, no grout required.
Back Painted Glass is any form of clear glass that is painted from the back side and viewed from the front side, or "first surface" side. Back painted glass is widely used for architectural spandrel glass, colored glass walls for interior glazing, colored glass back splashes, glass marker boards and dry erase boards, colored glass counter tops, shower walls, artistic glass, auto glass, marine glass, aero space glass, and more. Back painted glass is a modern alternative to other surfacing materials such as tiles and laminates in the world's decorative and architectural industries.
Some photos of back painted TOUGHENED GLASS and printed toughened glass for kitchen splashback show:
Kitchen Splashbak Glass, Toughened Splashback Glass, Back Painted Splashback Glass
Shanghai Lead Glass Co.,Ltd , https://www.leadglaze.com