The three-roll gate reads a card over many people Causes of trouble Smart three roller gate Anti-collision swing gate

When the smart three-roll gate is in use, it usually takes only one person to swipe the card once. However, sometimes, the three-roller brush can hold several cards at a time. What are the reasons for such problems?

The smart three-roll gate reads a card, which can be passed continuously by many people. The failure is mainly caused by the following reasons:

1) The signal that the user's card reader system outputs to the gate master is not stable (there is jitter, such as the relay output type read/write system), and the gate machine works in the reading card memory working mode (P08 = 0).

The following methods can be used to eliminate the fault:

a) Switch the working mode of the gate to read without card, see the appendix for the specific method;

b) Delay the signal output by the control system for 1 second;

2) The resetting tension spring of the positioning arm has failed or the pulling force is insufficient, resulting in that the positioning arm cannot be reliably reset and locked.

With regard to the use and purchase of many turnstiles, wing gates, and swing gates, you can consult our professional

Sub-control Box

Sub-Control Box,Integration Led Dimmer,Led Dimmer Artnet Controller,Mini Lighting Led Dimmer

Shen zhen SH LED Technology Co.,Ltd , https://www.pixellightsolutions.com