The charm of purple sand crafts lies in the main tea set
The main utensils for making tea and drinking tea. (1) Teapot: An appliance used to make tea. The pot consists of a pot lid, a pot body, a pot bottom and a ring foot. The lid has holes, buttons, seats, covers and other details. The body of the kettle has mouth, extension (lip wall), mouth, flow, belly, shoulder, handle (handle, plate) and other details. Due to the different parts of the pot, the cover, the bottom and the shape, there are nearly 200 basic forms of the pot.
Take the division. 1 side lifting pot: the pot handle is ear-shaped, opposite the spout. 2 Lifting the beam pot; the pot handle is a rainbow above the cover. 3 flying pot, the pot is on the side of the pot body for the ribbon dance. 4 grip pot: the pot is round and straight and the body is 90°. 5 No pot: The pot handle is omitted, and the head of the pot is poured into the tea.
Divided by cover. 1 gland: The lid is pressed flat on the mouth of the pot, and the mouth of the pot is not exposed. 2 Cover: The cover is embedded in the pot, and the cover is flat with the mouth of the pot. 3 section cover: the cover and the body of the kettle are integrated, only the slit is visible.
Divided by the bottom. 1 æº bottom: The bottom of the pot is embossed into a concave shape, without adding enough foot. 2 nail foot: add three protruding feet on the bottom of the pot. 3 Bottom: Add a circle around the bottom of the pot.
With or without filter. 1 ordinary pot: the above various teapots, no filter. 2 Filter pot: In the above various teapots, a straight barrel-shaped filter or strainer is placed in the mouth of the kettle to separate the tea residue from the tea soup.
Divided by shape. 1 rib pattern: like the curved veins in the plant, there are concave lines on the outer wall of the pot, called the ribs, and the wall between the ribs and the ribs has a rounded feeling. 2 Geometry: Shaped by geometry, such as square, rectangle, diamond, sphere, ellipse, cylinder, trapezoid, etc. 3 bionic shape: also known as natural shape, imitation of various animal and plant shapes, such as pumpkin pot, plum pile pot, pine dry pot, peach pot, petal shaped pot and so on. 4 book shape: on the pot made, engraved text verses or characters, landscapes, flowers and birds.
(2) Tea boat: a tea set with a teapot. It not only enhances the appearance, but also prevents the teapot from scalding the table.
1 disk shape: the boat is short, the whole is like a disk, and the side-view teapot form is fully displayed. 2 bowl-shaped: the boat is tall, and the side is flat and only sees the upper part of the teapot. 3 Sandwich: The tea boat is made into a double layer, and there are many drainage holes in the upper layer, so that the water overflowing from the brewing flows into the lower layer, and there is a water outlet, so that the accumulated water in the interlayer is easily poured out.
(3) Tea ç›…: also known as tea sea. A tea set that contains a cup of tea. Because it has the function of uniform tea concentration, it is also called fair cup.
1 pot shape: use a teapot instead. 2 No handle: The pot handle is omitted. In order to distinguish it from the pot, the pot mouth is often pulled out into a flange instead of pouring the water. 3 Simplified ç›…: No cover, pull out a simple pour spout from the body, with or without a handle.
(4) Teacup: An appliance that holds a cup of tea and drinks it.
1 Flip cup: The cup mouth is turned outwards like a trumpet. 2 open cup: the cup mouth is larger than the bottom of the cup, also known as the cup. 3 straight cup: the cup mouth is the same as the bottom of the cup, also called the barrel cup. 4 closing cup: the cup mouth is smaller than the bottom of the cup, also known as the drum cup. 5 cups: a cup with a handle attached. 6 cover cup: a cup with a lid attached, with or without a handle.
(5) Scented cup: Hold the soaked tea soup, pour it into the cup after the cup, and smell the instrument that remains in the bottom of the cup.
(6) Cup holder: The bottom device for placing the cup.
1 disc shape: the tray is short and disc-shaped. 2 bowl shape: the support is towering, and the lower part of the cup is surrounded by the bracket. 3 high foot shape: there is a cylindrical foot under the cup holder. 4 circle shape: a hollow hole is left in the center of the cup holder. The hole has a vertical edge along the upper and lower sides, and the bottom of the cup is fixed on the bottom.
(7) Cover: Place the lid of the lid, lid, and lid to keep the lid clean and avoid wet the table.
1 tray type: shaped like a cup holder. 2 Support type: cylindrical, supporting the cover from the center point of the cover; or a cylinder, supported from the periphery of the cover.
(8) Tea bowl: brewing tea utensils, or holding tea soup as a drinking tool.
HEUI tools are specially for HEUI diesel injection system repair, used for CAT C7, C9, C-9, 3126, and HEUI pump. These tools cover disassembly and assembly, measuring device, adaptors for different injectors etc.
These tools meet different maintenance applications, are easy to use, and greatly improve maintenance efficiency.
Heui Tools,Cat Heui Injector Repair Tools,Heui Injector Tools,Tools For Heui Injector Assembly
CHENGDU UNICO MACHINERY CO., LTD , https://www.injectortestbench.com