Sun room should choose what material?
Nowadays, the architectural environment is becoming more and more beautiful. People are pursuing a sense of integration with nature and more and more glass sun rooms have emerged. What are the materials used to create the sun room? What are the differences between aluminum and steel and raw materials? From the production of the sun room, we look at the comparison of these two materials together.
Aluminum alloys are of high value, can be extruded accurately, and have good load-bearing properties. The aluminum alloy texture sun room provides unlimited possibilities for individual design. It can have different shapes and architectural types to reveal individualized features. There is more space for the choice of colors. Aluminum sun room with proven safety, strong endurance and best thermal insulation.
The steel structure sun room has no restrictions on creativity, size and shape. All buildings, from simple installation of balcony glass to cross-floor glass installations, can be realized because the steel has good compression resistance and its high stability determines its It can also be applied to large-scale buildings. Due to its narrow visible surface, it increases the brightness of the room; it also achieves good thermal insulation performance under extreme weather conditions.
The environmental significance of choosing aluminum alloys
Aluminum comes from almost inexhaustible bauxite on Earth. 60% of the energy used to smelt aluminum mines comes from the world's completely non-polluting water resources. The old aluminum alloy material is recycled and reused and still maintains its original quality level. The energy required to melt the old aluminum alloy material is only equivalent to 5% of the smelted aluminum. Today, 35% of aluminum alloys in Germany are recycled, and this ratio is still increasing.
Whether there is heating facilities, differences in performance
The sun room without heating facilities was built on the basis of the original building and is independent of the original building. Sunlight does not have the need for heating. It can act as a heat buffer and reduce the heat loss of the building. Therefore, this kind of sun room is extremely advantageous in balancing the heat loss of the entire building.
The sun room with heating facilities may or may not need to communicate with the original building. It can increase the building area as a part of the curtain wall or an external hut; it can also balance the heat, the loss of heat in the room and solar energy received in the sun room offset each other.
Buy materials Sun room Sun room decoration Aluminium glass room
Tunnel Spear Bolt is classified under the special type of bolts that are known as structural bolts which can be produced in various grades, sizes and load capacities depending on their specific use. These spear tunnel Bolt are utilized to make transportation through undersea and underground tunnels possible by binding together a number of metal beams and posts which make up the tunnel`s frame.
Application of Tunnel Spear Bolt
For comnecting concrete rings by casting plastic dowel in
Photos of Application of Tunnel Spear Bolt
Technical Requirement of Tunnel Spear Bolt
1.Material :grade 4.6,5.8,6.8,8.8,10.9,12.9
2. finish
Plain,Dacroment,Hot Dip Galvanized
Supply city of Tunnel Spear Bolt
Denmark,Spain,India,Italy,USA
Tunnel Spear Bolt,Rail Steel Tie,Spear Bolt With Washer,Hdg Spear Bolt
TAICANG ZHONGBO RAILWAY FASTENING CO., LTD. , https://www.railfastener.com