Stop bearing view
2023-08-07 01:09:20
| Home>Bearing knowledge>stop bearing view |
Stop bearing view
Source: China Bearing Network Time: 2014-07-26
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
The importance of a clean shaft:
It is very important to adhere to the bearing and smooth cleanliness.
Before the inspection, the external appearance of the machine should be taken; then the parts around the bearing are removed. The oil seal is a very weak part; therefore, it must be taken care of; do not apply excessive force; then carefully look at the oil seal and its surrounding parts; if it has been presented When the performance is bad; it must be replaced; a bad oil seal will cause damage to the bearing and a strict equipment stop.
View the smoothing agent:
Apply a little smoothing agent to the conflict between the two fingers; if there is a contaminant, feel it; or apply a thin layer of smoothing agent on the back of the hand; then seal it.
Replace the smoothing agent:
The oil-smooth bearing is after the old oil is drained; if possible, refill the fresh oil and let the machine spin at low speed for a few minutes. Try to get the oil to collect the residual contaminants; then drain the oil; the oil is The best before filtering.
The grease smoother bearing used in the replacement of grease should prevent the cotton material from joining the joint to any part of the bearing; because these residual fibers can be wedged between the rolling elements and form damage; especially It is the use of small bearings that need to pay attention to this problem.
Cover the exposed bearings:
When looking at bearings, do not expose the bearings to contaminants or moisture. If the work is stopped, cover the machine with oil-paper plastic sheets or similar materials.
If the unshielded bearing is removed without being disassembled and can be viewed; remove it with a white spirit by applying a brush; then dry it with a lint-free cloth or blow it with compressed air. Dry (pay attention not to let the bearing assembly start to rotate).
Use a small mirror and a probe used by a similar dentist to view the track surface of the bearing, the holder and the beads. If the bearing is not damaged, it should be based on the smooth explanation provided by the original machine or on pages 204 to 247 of this book. The claim is fulfilled again.
It is not necessary to remove the bearing with the sealing cover or dustproof, only scrub the external appearance. If the bearing is damaged, it needs to be replaced. The replacement of the bearing during the timed protection period is far better than that due to the damage of the array. It’s more economical to lose it.
Recommend to friends comments close window
| Bearing related knowledge |
| How does the radial clearance of the oscillating screen bearing affect the oscillating screen? Full-function CNC bearing heaters on the anti-rust method of bearings |
This article links to http://
Please indicate the bearing network http://
Previous:High-speed spindle system Next: Correct use of KOYO bearings and common problems
Large Size Plate Drilling Machine
1.Drilling,reaming,chamfering,slot milling function,all drilling heads can work together,or independently.
2.In X,Y direction for automatic point drilling,spindle speed and feed speed stepless adjustable.
3.Programming software based on the WINDOWS platform,with CAD interface,quick and easy programming,preview image.
4.Automatic chip removal,cooling liquid recycling.
5.Key CNC systems,electrical components adopt well-known domestic and foreign products.
69.The first choice for large tube sheet drilling in heat exchanger and chemical machinery industry.
Cnc Drilling Machine,Steel Plate Drilling Machine,Steel Structure Drilling Machine,High Speed Drilling Machine
Shandong EN FIN CNC Machinery Co., Ltd , https://www.sdfincncmachine.com