Steel drum cleaning process and equipment structure

2018-05-06 12:02:24

crafting process

Pre-degreasing

Degreasing

First wash

Second washing

Phosphating

Third wash

Operating temperature

50Â°CÂ±5Â°C

Normal temperature

50Â°CÂ±5Â°C

Normal temperature

Processing time (minutes)

Processing section length (m)

1.2

2.4

1.2

2.4

1.2

Casing made of 4mm thick carbon steel plate

long

1,000

2000

1,000

2000

1,000

width

1450

high

980

Filled glass steel

2.5mm

2.5

1.5

3.0

1.5

With water pump

65SG30-27

65SG30-50

65SG30-27

65SP30-50

65SG30-27

Electricity consumption kw

7.5

Infusion tube material

Carbon steel

stainless steel

Carbon steel

Nozzle material

stainless steel

Steam mode

Steam coil

control method

switch

Note: 1. The drum cleaning operation is carried out in an enclosed energy channel, and the channel is made of 4mm thick plastic plate.

2, cleaning methods: take a horizontal spray. During the spraying, the steel drum rotates while rotating, so that the cylindrical surface of the steel drum (finished product barrel) and the barrel bottom lid are sprayed on three sides. Since the barrel rotates, the appearance of the steel barrel is completely cleaned. When the semi-manufactured product is to be cleaned, the liquid sprayed from the nozzles of the bottom cover of the spray tub is sprayed into the interior of the pail so that the inside and outside surfaces of the pail frame are cleaned. Barrel bottom cover cleaning is inserted in the transmission chain for cleaning.

3, the transmission chain is about 20 meters long, about 19 meters of rails, all made of stainless steel. Transmission speed is continuously adjustable from 0.4 to 2.5m/min.
4, the processing volume of finished barrels per minute, half, half a barrel per minute.