Stainless steel pneumatic diaphragm pump product analysis
2023-10-13 07:08:51
QBY stainless steel pneumatic diaphragm pump is a new type of conveying machinery, the use of compressed air motors as the power source for a variety of corrosive liquids, with particles of liquid, high viscosity, volatile, flammable, highly toxic Liquid, can suck exhausted. A, QBY stainless steel pneumatic diaphragm pump Features: Plastic diaphragm pump without irrigation, suction up to 7m, lift up to 50m, the outlet pressure ≥ 6kgf / cm2; Widely used: for the vast majority of fluid delivery, both high wear and tear Sex media can also pump high viscosity or solid particulate media. Design compact: unbalanced valve design, never stop the piston, no dead; patented stiffener design, high temperature, corrosion resistance, long life. Efficient production: less gas consumption, flow, pulsation, less wearing parts, high performance. Easy to operate: installation, maintenance, easy to move, simple operation steps. Second, QBY stainless steel pneumatic diaphragm pump Applicable industries: Commonly used: industrial / municipal waste water treatment, food processing / biotechnology and pharmaceuticals, coating / ink / printing, paper, oil / gas, chemical / petrochemical / cosmetic, automotive / electroplating And polishing, ceramic industry. Stainless steel pneumatic diaphragm pump QBY stainless steel pneumatic diaphragm pump Advantage 1, due to the use of air as the power, so the flow rate with the back pressure (outlet resistance) changes and automatically adjust, suitable for medium and high viscosity fluid. Centrifugal pump operating point is set on the basis of water, if used for slightly higher viscosity fluid, you need to support reducer or inverter, the cost has greatly improved, the same is true of the gear pump. 2, in a flammable and explosive environment with pneumatic pump reliable and low cost, such as fuel, gunpowder, explosives, because: First, the ground is not likely to spark; second, no heat during work, the machine is not Will overheat; Third, the fluid will not overheat because the pneumatic diaphragm pump agitates the fluid to a minimum. 3, poor construction sites, such as construction sites, industrial and mining wastewater discharge, due to the impurities in the sewage and the composition of complex, easy to plug the pipeline, so the formation of the pump on the load is too high, the motor heat vulnerable. Pneumatic diaphragm pump through the particles and the flow rate can be adjusted, the pipeline automatically stop blocked to patency. 4, the other small pneumatic diaphragm pump easy to move, do not need the foundation, accounting for the ground is extremely small, easy and economical installation. Can be used as mobile material transfer pump. 5, in the hazardous, corrosive materials handling, pneumatic diaphragm pump can be completely separated from the outside world. 6, or some experiments to ensure that no impurities pollute the raw materials. 7, can be used to transport the chemical properties of relatively unstable fluids, such as: photographic materials, flocculation and so on. This is because the pneumatic diaphragm pumps have low shear forces and have a small physical impact on the material. Stainless steel pneumatic diaphragm pump body material are: ordinary stainless steel, 304 stainless steel, 316 stainless steel, 316L stainless steel, please specify when ordering. Expand to read: China World Expo in Central China Construction Water Show "Industry Leaders" Industrial Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: Xiao Hai http://fm.liuti.cn/ (Service Hotline:)
Decorating Sponge Roller,sponge roller,sponge water absorption roller
PRO-CHARGER CO., LTD. (VICTOR HERO HOLDINGS LTD, TIME VALUE LTD.) , https://www.pro-chargerco.com