Selection of thermal oil pump should be based on process, water supply and drainage requirements, to be considered from five aspects, both liquid delivery capacity, device lift, liquid properties, piping layout and operating conditions. â… , Calculation of effective cavitation allowance and suitable type of pump: Chemical nature, mainly referring to the chemical corrosivity and toxicity of liquid medium, is an important basis for selecting the type of heat pump oil pump and the type of shaft seal used. Liquid properties, including the name of the liquid medium, physical properties, chemical properties and other properties, the physical properties of temperature c density d, viscosity u, medium particle diameter and gas content, etc., which relates to the system lift. â…¡, the lift system required for installation of pump is another important performance data, generally to enlarge the 5% -10% head lift to choose. â…¢, the operating conditions are many, such as the operation of the liquid T saturated steam P, suction side pressure PS (absolute), the discharge side of the tank pressure PZ, altitude, ambient temperature operation is gap or continuous, the position of the heat transfer oil pump Fixed or removable. â…£, the discharge side of the highest level of liquid and some other data and pipe specifications and their length, material, pipe specifications, quantity, etc., in order to carry out the Department of comb head calculation and NPSH check. Installation of piping system conditions refers to the liquid from the liquid level to the liquid delivery distance to the suction side of the lowest liquid level, â…¤, select the pump to the maximum flow based on both normal flow, in the absence of maximum flow, usually Normal flow of 1.1 times as the maximum flow. The flow rate is one of the important performance data of the heat-conducting oil pump, which is directly related to the production capacity and conveying capacity of the entire plant. Such as the design process can be calculated in the pump normal, minimum, maximum three kinds of flow. Heat-conducting oil pump support using double-ended ball bearing structure, the front end with lubricating oil lubrication, the rear end with grease lubrication, the middle of a guide tube, to observe the sealing at any time and the recovery of HTF. The heat-conducting oil pump adopts the self-heating and heat-dissipating structure to change the traditional water-cooled structure, which makes the structure simple, small in size and economical in operation cost, good in performance and reliable in use. It is the second generation product developed on the basis of digestion and absorption of foreign oil pumps in our country. Structure for the single-stage single-suction cantilever foot support structure, the pump inlet for the axial suction, the outlet for the center vertical upward, and the same motor mounted on the base.
API is a mixture of any substance or substance intended for use in the manufacture of pharmaceuticals and used as an active ingredient in pharmaceuticals for pharmaceutical use. Such substances have pharmacological or other direct effects on disease diagnosis, treatment, symptomatic relief, treatment, or prevention of disease, or can affect the function or structure of the organism
Our API products are manufactured with professional technic and standard process which is also widely used as main materials of human medicine , Veterinary drugs and pesticides.
The API can be used to manufacture many products which have effect of Abnormal bleeding , it can be also used as the materials of human medicine , veterinary drugs and pesticides.
API& Intermediates
Medical Intermediate,Medical Chemical Intermediates,Veterinary Intermediate,Veterinary Drug
Hebei Senton International Trading Co.,Ltd. , http://www.sentonpharm.com