Seiko's glamorous teak solid wood furniture
Pomegranate solid wood furniture , insisting on using the most elite wood segments and Zen lines to cast every piece of furniture , where the eyes are, the smart lines and the pleasant color show the fine work of the pomelo solid wood furniture. Confused charm.
Seiko model, stemming from demand
After the teak wood is self-imported, the teak furniture is cut, chiseled, carved, repaired, scraped, ground, lacquered, more than one hundred to the process, and all are meticulous. Solid wood furniture, wood drying is the first step in the manufacture of furniture, and is also a key process that is difficult for general enterprises to control, because it determines whether the product is bent or deformed during long-term use. The wood of the grapefruit furniture is all processed by the imported high-frequency kiln drying equipment, which effectively controls the moisture content of the wood in the range of 8%-12%, thus ensuring the stability of the use of the wood. In addition, the production of wood after 25 to 30 days of kiln holographic, fully automatic and repeated forced treatment, but also under natural conditions for 15 to 20 days, in order to put into processing, so that the wood used to achieve a stable state.
The traditional carpenter craft is the treasure left by the ancestors. The structure of the wood craftsmanship in China is very precise. The combination of the board and the pin-and-pins of the pomelo furniture, the exquisite craftsmanship of the three sides, the ingenious design of the round and round, will Every piece of furniture is designed to be beautiful and durable.
The pomelo furniture adopts a fully enclosed lacquering process. Firstly, it is dry-grinded once, once in the middle mill, three times in the primer, three times in the oil mill, then three times in the color, three times in the topcoat. After these processes, the surface texture of the wood is incomparably clear. , without any attachments, showing a transparent, bright style.
It must be said that all the staff of the teak Zun adhere to the fine work of teak, and each finished product is the pride of the grapefruit.
Laser Cutting Decorative Panel
Laser Cutting Decorative Panel
|
Product Type
|
Room Divider,Partition Screen, Laser Cut Screen,Sliding/ Folding Screen ,Wall Panel Screen
|
|||
|
Finish
|
Powder coated/ wood color
|
|||
|
Fabricating Method
|
Laser cutting hollow-out, Cutting, Welding, Hand Polishing
|
|||
|
Pattern
|
Customized Design available
|
|||
|
Application
|
Decorative Living Room, Hotel, Bar, etc. Indoor and outdoor public space backdrop Elevator cabin, handrail,living room, background
wall, ceiling, Kitchen equipment Specially for bar,club,hotel,bath center,villa,shopping mall. |
|||
(1)Easy to install
(3)Good whiteness,transparency, refractivity and hardness
(4)No pollution or radiation to the environment
(5)Standard: High-quality;
Laser Cutting Decorative Panel,Decorative Steel Privacy Panel,Metal Laser Cut Panels For Cladding,Metal Laser Cut Panels For Garden
HEBEI KAYI BUILDING MATERIAL TECHNOLOGY CO.,LTD , https://www.kayimesh.com