Safety Harness

Specifications
climbing safety harness 
1. webbing width: 45mm 
2.100% Polyester 
3. free size, light and easy to wear 
4. EN361&ANSI Z359.1 

Feature:
 Climbing safety harnesses are a series of straps and buckles made of various materials. Most are made of nylon and nylon webbing. Other materials include different types of foam, mesh and micro fleece. The harness tends to be adjustable to fit the person using it.  

1. With 1 forging D-ring and 3 adjustable points for user's convenience
2. Light and easy to wear
3. Aways be used together with safety lanyard

Popular  lanyards are as follows: 

 

Other Models available:

Full body-harnesses are used for a variety of activities, including construction work and rock climbing, to prevent injury or death from fall. Pls check the proper models according to your applications. 

 

 

Packaging:

Each piece in color box, non-woven bags packaging or as you required. Popular packagings are as follows:

 

How to tie a safety harness:

1.Tie the webbing into a loop or runner using a water knot or other suitable climbing knot.

2. Wrap the loop around your waist, and secure with a locking carabiner.

3. Pull the bottom piece of the loop from your back up through your legs. Clip the webbing into the locking carabiner.

4. Tie another short piece of webbing around your waist, and clip it into the carabiner. This will provide an extra measure of safety during a fall.
 

Warning:

You should buy a harness that is made specifically for the job, sport or purpose you need the harness for. In addition, safety, functionality and comfort are also things that should be considered.

Specifications
climbing safety harness 
1. webbing width: 45mm 
2.100% Polyester 
3. free size, light and easy to wear 
4. EN361&ANSI Z359.1 

Feature:
 Climbing safety harnesses are a series of straps and buckles made of various materials. Most are made of nylon and nylon webbing. Other materials include different types of foam, mesh and micro fleece. The harness tends to be adjustable to fit the person using it.  

1. With 1 forging D-ring and 3 adjustable points for user's convenience
2. Light and easy to wear
3. Aways be used together with safety lanyard

Popular  lanyards are as follows: 

 

Other Models available:

Full body-harnesses are used for a variety of activities, including construction work and rock climbing, to prevent injury or death from fall. Pls check the proper models according to your applications. 

 

 

Packaging:

Each piece in color box, non-woven bags packaging or as you required. Popular packagings are as follows:

 

How to tie a safety harness:

1.Tie the webbing into a loop or runner using a water knot or other suitable climbing knot.

2. Wrap the loop around your waist, and secure with a locking carabiner.

3. Pull the bottom piece of the loop from your back up through your legs. Clip the webbing into the locking carabiner.

4. Tie another short piece of webbing around your waist, and clip it into the carabiner. This will provide an extra measure of safety during a fall.
 

Warning:

You should buy a harness that is made specifically for the job, sport or purpose you need the harness for. In addition, safety, functionality and comfort are also things that should be considered.

Axial Flow Pumps

Axial Flow pumps have lower heads but higher flow rates and are extremely versatile in low lift areas. The axial flow pump is divided into three types: vertical, horizontal and inclined, and its basic structure is the same. The impeller is fixed to the lower end of the pump shaft. There are usually 4 to 5 blades on the impeller. The blades are available in fixed, semi-adjustable and fully adjustable versions. The latter two can adjust the mounting angle of the blades within a certain range for efficient operation. The blades are bolted to the hub, the base of the blade is engraved with a reference line, and the hub has several mounting angular positions. The adjustment method is as follows: first remove the impeller, loosen the bolts, mobilize the blades to align the reference line with the required angular position line, and then tighten the bolt. This adjustment method is called semi-adjusting. The full adjustment is achieved by a special adjustment mechanism to adjust the blade mounting angle. The role of the guiding impeller is to convert the kinetic energy of the rotary motion of the impeller outlet liquid into pressure energy to avoid the impact and vortex loss caused by the rotation of the liquid.

Axial Flow Pumps,Mechaincal Seal Pump,Skf Bearing Pump,Overflow Elbow Pump

Sichuan Zigong Industrial Pump Co.,Ltd. , https://www.zgpump-global.com