Recognition Technology Maturity Domestic and Foreign Bio-sensing R&D in Synchronization [Full Text]

Scientific and technological trends learned from the Sino-Korea Biology Symposium held by Tianjin University of Science and Technology that Tianjin University’s “Post 80s” distinguished professor in Tianjin and “Haihe Scholar” Yang Jucheng took the lead in integrating multi-biological sensing intelligent control technology into naked eye 3D advertising. Machines, advertising machines can perceive the user's gender and age, and display the corresponding recommended products, users can switch different ads through voice and gestures. Yang Jucheng said that the intelligent advertising machine research and development technology with independent intellectual property rights is now mature and is being produced in collaboration with a Shenzhen merchant.

“There are many fingerprint, face, iris, and speech recognition technologies in China, but many biometric sensing technologies that fuse fingerprint, face, and speech recognition technologies are rarely researched. Many biometric sensing technologies are better than simple fingerprints, Face recognition technology is more accurate and safer.” Yang Jucheng said that the technology of face payment has emerged. A customer who has neither a bank card nor cash has gone to the supermarket. When he pays, the camera recognizes the face. You can identify him and complete the payment. Yang Jucheng said that the current challenge is how to make multi-biometric technology industrialized.

Despite numerous problems, the domestic biometric technology has been continuously improved. Then, what are the new scientific achievements abroad for the biological perception?

According to a report by the Australian Broadcasting Corporation (ABC) on the 16th, according to a new study conducted by Swedish scientists, human fingers are extremely sensitive and can sense elevations as high as a few nanometers. This study found significant implications for the development of private electronic devices and robots. Research papers were published in the "Science Report", a magazine in Nature.

Principal investigator Mark Ruttelande, a surface chemist at the Royal Institute of Technology in Stockholm, pointed out that until recently, touch is still a relatively unknown feeling. Ruthlander said: “What kind of surface the human finger is able to perceive and how to perceive it until recently still gives people a magical feeling.” Rutland grew up in Adelaide and took the Australian National University. To doctorate.

Previous studies conducted by scientists have found that there are three main "dimensions" that can be used to describe haptics: rough-flat, hard-soft and sticky-smooth. Rutland said: “In fact, there are other stimuli such as hot and humid, but we tend to exclude them and only pay attention to topographical things.” Rutland’s research team is made up of materialists and psychologists. In composition, they developed a test method for measuring the sensitivity of human fingers in distinguishing between rough and flat surfaces.

During the course of the study, scientists created 16 polymer surfaces with a series of parallel ridge structures. The distance between the ridges—called the “wavelength”—between 300 and 90 microns and 7 nanometers in height To 4.5 microns. In addition, they also use a blank surface with no ridges. In the experiment, they had 20 volunteers blindfolded and allowed them to perceive two surfaces at a time. Specifically, let volunteers slide on the surface with their index fingers. After this, they asked volunteers to compare the degree of similarity or difference between the two surfaces. What surprises Ruthlander is that the experimental results show that volunteers can perceive only nano-scale projections. He said: "Participants were able to distinguish between very small surfaces with an average difference of up to 13 nanometers. This discovery surprised me."

Ruthlander pointed out that understanding touch and haptic feedback helps to develop various electronic products and attract consumers. He said: "If you challenge a product in a store, you will certainly want to have other appealing places besides appearance or taste. You want to be able to perceive the product in a certain way and control it at multiple levels of perception. Tactile feedback."

Ruthlander said that the consumer electronics industry has the greatest interest in understanding and controlling tactile surfaces, and other industries can also be the beneficiaries of this research. He said: "The shampoo industry will also be interested in this kind of research, because the way hair is perceived is an important factor to attract consumers. In fact, no matter what kind of goods, consumers first use tactile perception, and then Decide whether or not to buy. Touch is an important factor influencing consumer purchase decisions."

Diamond Grinder Head Bit

If you're a novice stained glass hobbyist, a glass grinder can help you create beautiful, professional looking projects from the very start. Glass grinders allow you to alter the shape of your glass more easily than glass saws do, and you`ll waste less of that expensive glass due to inaccurate cuts. Because you can grind precisely, the pieces of your project will fit together better, and because glass grinders leave a rougher surface, copper foil will adhere better to the edges. Finally, stained glass grinders with specialty bits simplify tasks like drilling holes, mitering glass edges and removing texture from the glass surface. These tips and tricks can help you get more use out of your stained glass grinder, and ensure that you`re using it safely. Positioning Hints for Easier Working Place your glass grinder where you`ll get good overhead light to make it easier to work. Keep in mind, though, that your shadow will fall over your work. Add a second light to shine from the front for the best illumination while you work. Make sure that the grinder is at a comfortable height for you to work with. If you`ll be standing, you should be able to bend your arms at the elbow and place your hands where you`ll be holding the glass. Positioning the grinding surface higher or lower will put extra strain on your shoulders and lower back. Put a stool on the floor beside you. Working with one foot elevated can reduce back strain when you work for long periods of time. Put a splash guard around your stained glass grinder to keep from splattering other surfaces with overspray while you work. Working Tips for Glass Grinders Mark pattern lines on the glass with a paint pen. It will help you follow the pattern more easily and the paint is more likely to stay on than other types of markers. Have a towel handy for drying your pieces before you place them on the pattern to measure them. Keep your glass piece flat on the grinder`s work surface to prevent angling the edges. If the glass cuts your fingers while you`re grinding, you may need to reposition or replace the bit. Ease up and check the bit for wear to make sure the bit isn`t too worn to do its job properly. Keep your water reservoir filled to the right level. If you see a white buildup around the grinding head, it means that there`s not enough water getting to the bit. Check to be sure that the sponge has contact with the bit and that there is enough water or coolant in the reservoir. Stained glass grinders are a valuable addition to your stained glass supplies and tools. If you use it carefully and treat it properly, you`ll find that it`s invaluable in helping you create professional, beautifully finished pieces of glass art. Current glass grinder bit includes: Glastar Bits,Inland Grinding Bits,Mika Grinding Bits,twofers grinding bit,wizard grinding bit,Diamond Tech grinding bit

Diamond Grinder Head, Diamond Grinder Bit, Diamond Grinder Bits, Standard Replacement Grinder Bits, Standard Glass Grinder Bit, Glass Grinder Bits ,Dermal Diamond Grinder Bit, Glass Grinder Bit For Dermel, Glastars Grinder Bits

Hans Super Abrasive Diamond Tool Co.,Ltd , https://www.hansuperabrasive.com