Reasons for pumping water pumping poorly and repairing
| Home>Bearing knowledge>The reason and repair of poor pumping |
Reasons for pumping water pumping poorly and repairing
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
First, the pump does not absorb water or undrain. The reason is mostly that the bottom valve is stuck; the filtering water is somewhat blocked; the water absorption height is too high or the water is leaking; it can also be caused by the wrong steering; the impeller is blocked, etc. After one by one; Do not leave the repair of the bottom valve; remove the silage; correct the steering; remove the impeller and other methods.
Second, the pipeline leaks or leaks. The nut can not be tightened when the equipment is available. If the leakage is not severe; the cement can be modified in the local area where the air leaks or leaks, or the cement slurry is stirred with asphalt oil. Temporary repair can be applied Some wet mud or soft pansy. If there is water leakage at the joint; you can use a wrench to tighten the nut. It is necessary to remove the water from the head.
Third, the filler is overheated. Because the packing is too tight; the cooling water does not enter the packing; or the shaft is damaged. It can be properly loosened and the sealing tube is blocked. It is necessary to replace the packing wear. Infiltration in the oil before the equipment; Loaded in a circle; the cutting should be staggered; this can reduce the leakage. After the final filling of the packing, the gland should be tightly installed; adjust the tightness during work.
Fourth, the pump is violently sensation. The electric rotor can be unbalanced; or the coupling is poorly connected; the bearing wears and turns; it can also change some parts loose, break or the pipe support is not strong. Can be adjusted, repaired, reinforced, straightened, Replacement and other methods of disposal.
5. Demolition and repair of the impeller. The impeller blades are damaged or corroded; there are many pockmarks on the surface; the hard alloy should be replaced or plated; the impeller and the pump shaft should be fixed first when disassembling; Change the equipment head screw; then turn the top screw; pull the drive out gradually. Then remove the shaft from the pump casing; remove the impeller and send it to the repair shop for repair.
Recommend to friends comments close window
| Bearing related knowledge |
| Reasons for the noise of NSK bearings and processing methods Analysis of the new specifications of wind turbine bearings: The characteristics of "Electromagnetic Induction Bearing Heaters" affect the main factors of FAG bearing grinding 蜕 change layer Metallurgical skills of bearing steel |
This article links to http://
Please indicate the bearing network http://
Previous:Information on Rolling Bearings Next: Analysis of Foreign Imported Bearing Skills
CNC optical accessories are precision components used in the manufacture of high-quality optical products. These accessories are precisely manufactured using computer numerical control (CNC) machines to ensure accuracy and consistency.
Optical accessories produced using CNC machines include high-quality lenses, mirrors, prisms, and filters. These components are essential in optical devices, such as microscopes, telescopes, cameras, and laser systems.
CNC optical accessories are produced using a range of materials, including glass, quartz, and metal. The CNC machines can produce these accessories to exacting specifications, ensuring that each component is precisely crafted to meet the desired specifications.
One of the significant advantages of CNC optical accessories is their precise and consistent performance. The CNC machines used in their manufacture can produce components with extremely tight tolerances, resulting in optical accessories that offer superior quality and performance.
Another advantage of CNC optical accessories is their versatility. The CNC machines can produce components in a range of shapes, sizes, and designs, making them suitable for many different applications. They can also produce parts with intricate shapes and geometry, allowing for the creation of complex optical systems and devices.
CNC optical accessories are widely used in many industries, including aerospace, medical, and defense. They are also used in research institutions, universities, and laboratories around the world. These components are essential in the development of advanced optical technologies and devices, including laser systems, optical sensors, and imaging equipment.
In conclusion, CNC optical accessories are a crucial component in the manufacture of high-quality optical products. They offer high precision, consistency, and versatility, making them an essential tool for a variety of industries. With their ability to produce intricate shapes and geometry with high accuracy, CNC optical accessories offer a powerful solution for the creation of advanced optical systems and devices.
Eyewear Accessories,Men'S Optical Frames,Women'S Optical Frames,Mens Designer Optical Frames
Lizhi Precision Manufacturing Technology Co.,Ltd , https://www.autoindust.com