Perforated aluminum veneer microporous aluminum veneer has good characteristics

【China Aluminum Industry Network】1. Punched aluminum veneer is economical and economical to use: SoundTex non-woven acoustic paper ultra-thin flat design and small negligible volume can reduce a lot of storage costs compared to bulky glass wool. Save transportation costs.

2, SoundTex non-woven soundproof paper has good air permeability, will not hinder the effect of ventilation, this feature will have designers in the decision of the air inlet, outlet when there are more choices. And because SoundTex non-woven soundproof paper can be applied to various shapes of ceilings, it gives designers greater freedom of design.

3, punched aluminum veneer, environmental protection, safety, health: SoundTex non-woven fabrics, noise-sensitive fiber bonding firmly reduce the body's respiratory fiber dust. Due to the negligible volume when replacing the ceiling, there is very little waste and there is a very good noise reduction effect.

Aluminium veneer curtain wall adopts high-quality high-strength aluminum alloy plate, its common thickness is 1.5, 2.0, 2.5, 3.0MM, model 3003, and its status is H24. The larger size of conventional materials is 1220mm x 2440mm. Its structure is mainly composed of panels, ribs and corners. The corners can be bent or stamped directly from the panel, or they can be riveted on the small edge of the panel. The ribs are connected with the welding screws behind the board to make it a firm whole, which greatly enhances the strength and rigidity of the aluminum veneer curtain wall, ensuring the flatness and wind and shock resistance of the long-term use. If noise insulation is required, high-efficiency insulation and insulation materials can be installed inside the aluminum plate.

Stainless Steel Pillow Bearing

Stainless Steel Pillow Blocks mounted units are made of corrosion resistant stainless steel and are ideal for the food handling industry, water treatment plants, and salt water desalinization plants. Balls & Rings are made out of 440 Stainless Steel, Set Screws 410 Stainless Steel, slinger & Seal Frame 302 Stainless Steel, Retainer 302 Stainless Steel, Set Screw locking Collar (SNA only) 304 Stainless Steel, Seal Silicone Rubber Lubrication H-1 Food Grade Grease Operating Temp. Range -10° F to 250° F. Housings are 304 Stainless Steel Stainless steel. They are generally the most effective solution for highly corrosive applications. They do not experience the same flaking, cracking, deformation or discoloration issues associated with other corrosion resistant housing materials. They are virtually unaffected by scrapes and can easily handle significant radial loads.

Pillow Block Bearing,Stainless Steel Bearing,Stainless Steel Pillow Block Bearing,Steel Pillow Block Bearing

Shijiazhuang Longshu Mechanical & Electrical Equipment Trading Co., Ltd. , https://www.lsjgbearing.com