Old floor removal techniques Old floor removal considerations
If the wood floor is not regularly cared for or waxed, the wood floor will have no glossiness and the foot feel is not good. At this time, many users will choose to replace the floor, the old floor must first be dismantled, then what are the old floor removal techniques? What are the old floor removal precautions? The following small series on these two issues for everyone to be Detailed explanation.
Old floor removal techniques
1. What are the old floor removal techniques? If the floor is a composite wood floor, the removal process will be relatively simple. First, move the furniture to be demolished. Then use a flat-bladed screwdriver to open the skirting board. Then, pry the floor of the corner along the edge of the skirting board and remove it. When removed, this floor may be damaged, but other floors will not be damaged, but also can be completely removed. If the composite floor has a locking structure, it should be pulled out along the long side of the floor when it is removed, so it will be easier to dismantle. Then uncover the under-floor moisture-proof felt. At this time, the bottom layer may be somewhat damp. Therefore, you must open the window and allow the floor to dry before you can lay a new floor.
2. What are the old floor removal techniques? If the home is made of solid wood flooring, the removal process will be more responsible. The baseboard must be removed first, then removed from the edge of the corner, and a hammer should be used to lift the wooden floor. Because the solid wood floor is installed on the wooden keel, there is a certain degree of elasticity when picking up the wooden floor, and the construction is relatively difficult, and a cutting machine cannot be used. Because the use of a cutting machine can damage the ground, it can also cause sparks with the expansion bolts that secure the wooden keel. In the demolition, wood floors, it should try to maintain its integrity, because there are professional companies recycling solid wood flooring, they will process the old floor into a new sheet or paper, it can bring owners to bring some benefits, reduce decoration costs.
Demolition considerations for old floors
1. Some old floors can be renewed directly without replacing them. The surface of the old floor should be polished, putty, lacquer, and wax polished. After this operation, the old floor will be renewed. And compared to the new landmark, the old floor has been adapted to the indoor environment, the stability will be better, and its renovation costs are also low.
2. However, not all old floors can be refurbished. Laminate flooring cannot be refurbished because it has a layer of aluminum oxide wear-resistant on the surface. The renovation will destroy its wear-resistant layer, which will make the floor more susceptible to aging. In general, refurbishment of floor thickness of wood flooring, solid wood flooring and bamboo flooring above 4 mm can only be refurbished. Even if polished 1-2 mm, it will not have any effect on its floor.
3. If you want to refurbish the old floor, you must supervise its quality and look for professional construction personnel. Before construction, it must be ensured that the floor is clean and dry, and the ground should be brushed again with a primer, two coats of topcoat, and the next step can only be performed after the paint is completely dry.
4. It is best not to refurbish the old floor when it is refurbished, because there will be some differences between the old and new floors, and the refurbishment results will be poor. For some mildewed, damaged, deformed floors, new floors must be replaced.
The article concludes: The above content is Xiao Bian's explanation of the old floor removal techniques and the considerations for the removal of old floors. Before we remove the old floor, we must look to see if the floor can be refurbished. If it can, then just renovate it, so the cost is not so many. If you want to replace it, you must master the above removal techniques and pay attention to the removal.
Portable LED work lights are an essential tool for professionals and DIY enthusiasts alike. These versatile lighting solutions offer the convenience of portability combined with the efficiency and brightness of LED technology. Whether you are working in a dimly lit area or need additional illumination for your projects, portable LED work lights provide a reliable and efficient lighting source. With their compact and lightweight design, these portable work lights can easily be carried and positioned wherever needed, making them ideal for a wide range of applications. From construction sites to automotive repairs, portable LED lamps are a must-have for anyone seeking convenience, reliability, and superior lighting performance.
small work light, handheld led work light, rechargeable portable work light, portable hand lamp
Ningbo Le Monde Import & Export Co., Ltd. , https://www.lemondelighting.com