It is more important to understand the invisible quality of cabinet installation
When we shop for cabinets, we often go to the showroom to see if we actually touch the countertops and the door panels. Trying to find out if drawers or pull baskets are smooth, this step is of course very important, but in fact, In the case of cabinets, quality and service are visible and invisible.
The so-called visible quality, as mentioned before, is the appearance of the cabinet and the quality of the accessories. Cabinets must go through the quality inspection process before leaving the factory. In general, the products before leaving the factory should all be qualified. The visible service is the enthusiasm of the salesperson in the salesroom. The visible quality and service are certainly perfect and excellent.
The invisible quality and service refer to the attitude of the cabinet installation staff after installation and problems at the netizens' homes. The installation workers are basically paid according to the items and will inevitably be quick in their operations. Therefore, it is easy to cause rough installation. The countertops were not polished, and the door boards were not properly installed. After the problems occurred, they were pushed to each other by the company. These invisible qualities and services directly affect the external look and life of a set of cabinets.
Installers need special training
Why domestic cabinets are sad to "install" this? At present, the basic mode of cabinet installation is that the master brings apprentices to a worker with a little skill in technology and a worker who learns skills. It is not a matter of learning to learn. Instead, he takes your home as a driving range, so he installs wrong things and destroys things. It is not unusual.
Even the so-called skilled workers are trained in such a process. They have not received specialized training and lack sufficient understanding and understanding of the frame structure of the cabinet, and they lack the ability to handle complex situations on site. Facts have proved that in the cabinet installation, these workers are difficult to adapt to the ever-changing cabinet function accessories, special accessories and new tools in a short time, which will cause many hidden dangers in the installation process.
Normative design can reduce installation artifacts
Professionals say that the skills of domestic installation personnel are not worse than those of foreign countries. The key is to make sure that workers are operating under the specifications. The specifications must have detailed rules, and they are implementable and operative provisions.
A good cabinet manufacturer will strictly stipulate what is allowed to be modified and what is not allowed to be modified during the installation process. German cabinets are all pre-punched in the factory before the factory, including the handle position, as well as the connector between the adjacent cabinet aperture, these are not allowed to modify, so reducing the on-site installation Change factor. Their cabinets are not installed with traditional domestic bolts. Instead, two steel hanger rails are nailed to the back wall. Fixtures are attached to the hanger rails. Workers only need fine-tuning to ensure that the cabinets are horizontal and vertical.
In short, standardized cabinets can minimize the uncertainties of post-installation, save installation time (approximately half a day can be installed), and make the installation even DIY. Let the installation "fool". Of course, the design requirements of the cabinet itself are very high, and it is by no means an ordinary domestic company that can achieve it in the short term.
Kitchen Cabinets Kitchen Cabinets Doors Drawers Cabinets Doors Kitchen Doors
Dongguan C.Y. RedApple Industrial Limited , https://www.redapplebags.com