How to rule out the use of leaks in the unloader

The unloader, because of its simple operation and long equipment life, is widely recognized by the dust removal industry. The use of unloaders often causes problems with leakage, because the gap between the unloader wall of the impeller is too large. Discharge material is easy to leak. This can be set on the impeller pad, to solve the problem of leakage material. The unloader wall will always wear in the rubbing friction shell, resulting in leakage material. The unloader is a variety of dust removal equipment A very important part of the ash handling process, which guarantees the function of the sealed chamber and continuous or intermittent ash discharge; the ash column with a certain height retained in the high negative electrostatic precipitator ash bucket has a significant sealing effect. The machine has a compact structure, The advantages of beautiful appearance, easy to use, stable operation, low noise, etc., due to the unloader bearings, the gear box leaves the shell for a certain distance, for the general past unloader in the high temperature, lubrication and other aspects have a larger Improvements. Usually the structure of the unloader is composed of a rotor impeller with several blades, a housing, a seal and a speed reducer, and an electric motor. When the material in the upper silo is dropped by its own weight and filled in the gap between the blades, Bladed Rotate and discharge from the top, this is the working principle of the unloader, unloader can continuously discharge.

Flocking Measuring Tape

Shangqiu Jinda Tools Co.,Ltd , https://www.jindameasuring.com