How to make home more beautiful
First, after buying the lamps and lanterns, do not install the lamps first. You should carefully read the lamps' markings and read the installation instructions. Install and use the lamps according to the instructions. Otherwise, danger may occur.
Secondly, according to the light source parameters provided by the sign to replace the aging lamp in time, it is found that when the two ends of the lamp become red, the lamp is black or dark, and the lamp does not light, the lamp should be replaced in time to prevent the occurrence of ballast. Burnout and other unsafe phenomena;
Third, in the cleaning and maintenance, care should be taken not to change the structure of the lamp, and do not replace the parts of the lamp. After the cleaning and maintenance is over, the lamp should be installed as it is. Do not miss or replace the parts of the lamp.
Fourth, in the use of lamps but also to strengthen the maintenance in order to extend its service life. The lamp of the room should always be wiped with a dry cloth, and be careful to prevent moisture intrusion, so as to avoid the phenomenon of rust damage or leakage short circuit for a long time; lights installed in toilets and bathrooms must be equipped with moisture-proof lampshades, otherwise it will greatly shorten the service life; Lamps installed in the kitchen should pay special attention to fume-proof, because the accumulation of grease affects the illumination of the lamp; light-colored lampshades have good transparency, but are easy to stick to dust, and must be cleaned so as not to affect the penetration of light. If the luminaire is non-metallic, it can be wiped with a damp cloth so as not to accumulate dust and hinder the lighting effect;
Fifth, try not to switch as frequently as possible when using lamps. Because the current of the lamp is frequently started, the current through the filament is greater than the current during normal operation, so that the temperature of the filament rises rapidly to accelerate sublimation, which will greatly reduce its service life. Therefore, try to reduce the light switch.
At present, the lighting products on the market are exceptionally rich, with mid-range lighting prices ranging from tens to hundreds of dollars, and up to several thousand dollars of luxury lighting. If the unfurnished home is compared to a canvas, the decoration is likened to a painting process, and lighting is the crowning touch on this home picture.
However, if you do not get the proper cleaning and maintenance, then high-end lighting will soon be bleak.
Like other furniture, lamps need regular cleaning and maintenance to maintain the brightness of the lighting and extend the life of the lighting. The lampshades will gradually become dark due to the dust. If they are not dealt with in time, the average brightness will be reduced by about 30% a year. Therefore, it is especially important to regularly clean the lampshade and lamp or bulb. If there is a black shadow on both ends of the lamp or there is a black deposit in the lamp, it should be replaced in time.
In addition, moisture can cause rust and drop paint, and shorten the life of the luminaire. Therefore, moisture protection is the key to the maintenance of lighting, especially the bathroom, bathroom lighting and kitchen stove lamp, must install moisture-proof lampshades to prevent moisture intrusion, to avoid rust damage or leakage short circuit.
It should be noted that the lamp is best not to wash with water, as long as the wipe with a dry rag can be wiped, if you accidentally touch the water to dry as much as possible, should not be wiped immediately after the light wipe with a wet cloth, because the lamp temperature encountered water easy burst.
Lighting brand entrance decoration lighting switch lighting bathroom paint
Metal Waste Incinerators,Galvanized Waste Incinerator,Black Waste Incinerators,Waste Incinerator Incinerator
xiacun factory , https://www.xiacunmetal.com