How to extend the life of solid wood flooring

We spend a lot of money on solid wood flooring. We certainly hope that the longer we can use it, the better. But how to extend the useful life span? Here are five points to protect your solid wood flooring. The floor is more durable and more longevity.
1. It is necessary to dust the parquet
Use a broom or vacuum cleaner to remove dust, often trampling
More must be diligent in vacuuming. Pay special attention to the hallway and the walkway leading to the outside. In addition, in order to prevent dust from entering the house, you can place a dust-proof pad on the entry or install a dust-proof strip on the bottom of the door.
2. Solid parquet is better than wet
When using a mop to clean solid wood composite flooring, wring the mop and then using a relatively good, too wet mop, the water will infiltrate the seams when in use, and damage the solid wood composite floor, causing the warp and deformation of the solid wood composite floor.
3. Carefully choose the right skin care products
Choose the water-based wax that is suitable for solid wood flooring. Only use one wax product at a time. If you use different wax products, they will react with each Other to make the solid wood flooring sticky and dirty.
4. The amount of wax products to be appropriate
If the coating is too thick, the dust will be more likely to stick to the parquet, and it will be more difficult to polish the parquet.
5. Be careful when moving
To move the furniture, it is recommended to use the lifting method to avoid dragging so as not to scratch the engineered wood floor. To further protect your parquet, the bottom of the furniture can be equipped with a cloth cover or gasket.
Solid wood floor flooring nature floor furniture
After installing the nut and Bolt in place, insert the locking bar from the groove of the bolt and make the V-shaped teeth of the locking bar snap into one of the V-shaped grooves, then push the whole locking bar into the groove, as the V-shaped teeth are stuck in the nut.
Wing Nuts And Bolts,Wing Nut Screw,Butterfly Nuts And Bolts,Wing Tek Screws
Kunshan Zhonggu Precision Hardware Co., Ltd. , https://www.zgfastener.com