How to choose the correct choice of panel furniture?
The following points should be noted when purchasing panel furniture:
Formaldehyde emission
Panel furniture is generally based on particleboard and medium density fiberboard. When consumers buy, they open the door and drawer. If they smell a irritating smell, causing tears or coughing, it means that the amount of formaldehyde released in the furniture exceeds the standard, and should not be purchased.
Hardware Accessories:
The panel furniture uses metal parts and plastic parts as fastening connectors, so the quality of the metal parts also determines the quality of the inner quality of the panel furniture. Metal parts require dexterity, smoothness, and good surface plating treatment. There should be no rust, burrs, etc., and the precision of the fittings is higher.
Production quality:
In the production of panel furniture, the formed panels are assembled by cutting, decorative and edge-sealing, and the components are assembled. The quality of the panel is mainly based on the quality of the saw, the quality of the edge and the surface, and the quality of the panel. Generally speaking, the cutting technology of the sheet metal is within 0.01 mm per meter. After the cutting of the sheet with precise requirements, the edge profile is flat and the angle is good. After the furniture is made, the slope of the plate will not appear. The side and surface decoration are mainly seen. Whether the rubber on the decorative parts is uniform, whether the bonding is firm, whether the trimming is smooth and smooth, whether the end face of the visible part such as the side plate of the component, the door panel, the drawer panel, etc. is edge-sealed, and the edge of the well-decorated plate is touched. There are no signs of sticking.
Surface Quality:
The panel furniture is made of wood-based panels such as particleboard and medium-density fiberboard. The surface is decorated with melamine, PVC, wood veneer and paper grain. The wood-like pattern is clear and natural, smooth and flat, with good vision. Effect and feel. When purchasing, mainly look at the surface of the sheet for scratches, indentations, bubbling, degumming and peeling marks and other defects; whether the wood grain pattern is natural and smooth, do not have the feeling of artificial creation.
Laminated Glass is produced when two or more glass lites are permanently bonded with one or more plastic interlayers (PVB) using heat and pressure. The glass and interlayers can be a variety of colors and thicknesses. Laminated glass is often called [safety glass" because it meets the requirements of various code organizations. Laminated glass can be broken, but the fragments tend to adhere to the plastic layer and remain largely intact, reducing the risk of injury. Laminated glass can be incorporated with heat-strengthened and Tempered Glass to further increase impact resistance. Clear laminaterd glass is widely used for windows, doors, glass walls, partitions, room divider, balcony, balustrade, fence and so on. And also Colored Laminated Glass, ultra clear laminated glass, printed laminated glass can also be choices for different applications.
It can be made into clear laminated glass, colored laminated glass, Triple Laminated Glass, laminated Insulated Glass , printed laminated glass, Low-E Laminated Glass, toughened laminated glass, tempered laminated glass and so on.
Frosted Laminated Glass,Laminated Safety Glass,Cutting Laminated Glass, SGP Laminated Glass
Shanghai Lead Glass Co.,Ltd , https://www.leadglazing.com