How to care transmission imported bearings
2024-09-04 15:09:20
The transmission inlet bearing is a kind of central nervous system in the operation of the machine. In order to ensure the normal working form of the transmission shaft, the effect of life can be prolonged in this respect. In the use, we should pay attention to the following points;
1. In order to ensure the dynamic balance of the drive inlet bearing, attention should always be paid to whether or not the balance welding lug is welded off. The new driveshaft assembly is provided as an accessory. When installing the new driveshaft, attention should be paid to the assembly mark of the telescopic cover. The flange fork should be kept in a plane. When disassembling the drive shaft during maintenance, the assembly marks should be printed on the expansion sleeve and the flange shaft in order to keep the original assembly relationship unchanged during reassembly.
2. It is forbidden for cars to start with high gears.
3, is strictly prohibited to slam the clutch pedal.
4. Vehicle overload and speeding are strictly prohibited.
5, grease should always be added to the universal joint cross bearing, the season is different, the use of grease is not the same, such as the summer should be injected on the 3rd lithium grease, winter injection of lithium on the 2nd grease.
6, should always check the drive shaft hanger fastening situation, support rubber is damaged, whether the drive shaft connection is loose, drive shaft deformation.
7, should check the drive shaft working condition.
The form of imported bearings in this aspect also has a special situation. Faced with changes in all aspects of this aspect are certain changes, so the daily maintenance function is a form of performance to solve from this aspect .
1. In order to ensure the dynamic balance of the drive inlet bearing, attention should always be paid to whether or not the balance welding lug is welded off. The new driveshaft assembly is provided as an accessory. When installing the new driveshaft, attention should be paid to the assembly mark of the telescopic cover. The flange fork should be kept in a plane. When disassembling the drive shaft during maintenance, the assembly marks should be printed on the expansion sleeve and the flange shaft in order to keep the original assembly relationship unchanged during reassembly.
2. It is forbidden for cars to start with high gears.
3, is strictly prohibited to slam the clutch pedal.
4. Vehicle overload and speeding are strictly prohibited.
5, grease should always be added to the universal joint cross bearing, the season is different, the use of grease is not the same, such as the summer should be injected on the 3rd lithium grease, winter injection of lithium on the 2nd grease.
6, should always check the drive shaft hanger fastening situation, support rubber is damaged, whether the drive shaft connection is loose, drive shaft deformation.
7, should check the drive shaft working condition.
The form of imported bearings in this aspect also has a special situation. Faced with changes in all aspects of this aspect are certain changes, so the daily maintenance function is a form of performance to solve from this aspect .
Smart Drawer Cabinet,Classic Chest Cabinet Of Drawers,Vertical Plan Chest Cabinet,Chest Of Drawers Vertical Style
Jiangsu Xicang Intelligent Technology Co., Ltd. , https://www.xciwarehousing.com