How is the mortar tile?
Tiling We know that it is an indispensable step at home. With the development of the times, more and more materials for tiling are available. Each material also has its different points. When choosing, you can decide according to your own needs. Here's a small series to tell everyone about the mortar tile and tile how much a square.
How is the mortar tiled?
How do mortar paste tiles work? Generally speaking, it is OK to use this kind of stickers, but when you operate it, you must be able to regulate them without losing them.
Tips for tiling
Ground tiling construction skills
1. Tiles should be based on the type of tile you are building. For example, if you choose a ceramic tile, then you will need to soak the ceramic tile.
2. When you are pasting a tile, the cement mortar must be thoroughly applied to the back of the ceramic floor tile. Remember to use an eraser to knock it out after laying. At the same time, remember to use a level ruler to check and correct and wipe off the surface cement mortar, which is convenient for later care.
3, after two to three hours of tile sticking, remember to use white cement to wipe the joints with cement and sand = 1:1 (volume ratio) of the cement mortar, remember to put the joints to fill the dense, this surface to People look smooth. Wipe the surface with cotton again.
Wall Tile Paste Construction Tips
1. When the grassroots must deal with it, remember that it is necessary to clean all types of dirt on the wall, and remember to water one day ahead. If the grassroots is a new wall, when the cement mortar is 70% dry, then you can consider rowing, bombing, and sticking the tiles.
2, before the official paste must paste the standard points, so we must control the smoothness of the paste surface, the operation should be used at any time to check the flatness by the ruler, if there is found to be uneven, not straight, then we must remove the re-stick .
3, tile paste before you must remember to soak in water for more than two hours, you can look at the brick body does not bubble prevail, take out and dry can be used. Paste from the bottom up paste, requiring mortar full, ash, must remove the heavy sticky, not allowed from the brick joints, mouth ash filling pad.
4, when the shop sticks to the pipeline, lighting switch, there are some bathroom equipment support and so on, then at this time is to pay more attention, must be used to cut anastomoses, must not use those pieces of bricks together Paste. The entire or independent part of the paste should be completed at one time, so that the effect will be more beautiful, but also in the joint mouth to stay in the construction joint or the corner.
How much is a tile squared?
Generally speaking, the price of a tile is larger and the size is larger. The price is about 40 to 50. It is not difficult to put tiles on it. Some of them stick to themselves, and the construction steps are relatively simple.
Summary: Regarding how well the tile is tiled and how much money is related to the tiles, it is introduced to this. The material used for tiling is still more critical. At the same time, it is necessary to do some preparatory work before paving. It will be more beautiful.
Long Neck End Mills,Tapered Degree Long Neck End Mill,Long Neck Ball Nose End Mill,Long Neck Square End Mill
Supal(changzhou)Precision Tools Co.,Ltd , https://www.endmillpro.com