Expert Weapons: 10 questions to ask when buying cabinets
The kitchen, as a key decoration area of ​​the house, is closely linked with the owner's dietary health. Buying a cabinet that is eco-friendly, beautiful, practical, and cost-effective is a common goal for many owners. This website reminds netizens that there are several key issues to keep in mind when choosing cabinets.
>>> Link: This site friend cabinet cabinet full record
1, to ask the thickness of the cabinet board
Currently on the market there are 16mm, 18mm and other thickness specifications of the plate, the thickness of the different costs vary greatly, only this one, 18mm thick than the 16mm thick plate costs 7% higher, 18mm thick plate made of cabinets The service life can be more than doubled to ensure that the door panel is not deformed and the table top is not cracked. When consumers look at the samples, they must carefully understand the composition of the materials and have a good idea.
2, to ask whether the independent cabinet
The entire set of cabinets will affect the fastness, so consumers should be clear when buying the whole cabinet, the difference in service life and stability between the two to three times the cost of a difference of 5%. Consumers can identify through the packaged and assembled cabinets. If separate cabinets are assembled, each cabinet should have a separate package; consumers can also observe them before the cabinet is installed.
>>> Building Materials Mall Cabinet Promotional Products
3, to ask whether artificial stone is installed without dust
In the past, many manufacturers would perform artificial stone polishing on the installation site, causing environmental pollution in the living room. This was unexpected to consumers. Now some leading cabinet makers have realized this. If the cabinet manufacturer you choose is dusty, you must choose to install the countertop before the floor or paint enters the market, otherwise you will have to spend money on the secondary cleaning.
4, to ask the sink cabinet aluminum foil installation method
Sink cabinets are pressed once or glued when installed.
Once pressed, the sealing performance is more perfect, water and moisture are not easily penetrated, and the cabinet is more effectively protected and the service life of the cabinet is prolonged.
>>> Building Materials Mall Cabinet Promotional Products
5, to ask whether you can provide test report
Cabinets are also furniture products, and the country has expressly stipulated that it shall issue a product inspection report and express the formaldehyde content. Some manufacturers can only provide raw material inspection reports, but the environmental protection of raw materials does not mean the environmental protection of finished products. Only qualified products can prove that their products are qualified. Therefore, consumers can ask for the purchase of the business, you can also record the quality inspection report produced by the business and call the quality inspection department to verify the authenticity.
6, to ask whether the anti-mute silent edge
The use of cabinets with soundproofing and silent edge sealing can reduce the impact force when the doors are closed, eliminate noise and prevent the entry of cockroaches and other insects, and there is a difference of 3% in the cost of the sealant-proof seals. Also check whether the front panel, door panel, box and sealing strips, and anti-collision strips are processed by the membrane pressure of the machine. Sealing is not strict, will cause smoke, dust, insects to enter.
>>> Building Materials Mall Cabinet Promotional Products
7, to ask about the composition of artificial stone
Suitable for the kitchen countertop material, there are fire board, artificial stone, natural marble, granite, stainless steel, etc., of which artificial stone countertops the best performance-cost ratio. The inexpensive tabletop calcium carbonate has a high composition and is easily cracked.
At present, more composite acrylic and pure acrylic are used in the market. The acrylic composition in composite acrylic is generally about 20% of the best ratio.
8, to ask how to assemble
Usually small factories or manual on-site production can only be screwed or glued together.
The use of the latest third-generation box ram structure plus fixtures and quick-loading parts, more effectively ensure the stability and affordability of the box, and less use of adhesive, more environmentally friendly.
>>> Building Materials Mall Cabinet Promotional Products
9, to ask how to seal the back board
In order to save costs, some manufacturers cut corners, and only do one-sided seals on the back panel. The ones that cannot be seen are bare. After the single-sided sealing, the backboard is prone to moisture and mildew. It is also easy to release formaldehyde and cause pollution. Therefore, it must be double-sealed.
10, to ask the warranty period
Do not only care about the price and style of the product. Can you provide quality after-sales service is the performance of the manufacturers. For example, the warranty period, some manufacturers are one year, some manufacturers are two years, and some are five years. Manufacturers who dare to protect for five years will definitely demand higher quality in the aspects of materials and manufacturing, and they are also the most affordable for consumers. Many small factories are cheap, but the warranty is very short or there is no warranty. Once a problem is solved, it is difficult to get a reasonable solution. Therefore, when ordering cabinets, consumers must ask questions such as product warranty.
Cabinets Doors Prices Doors Formaldehyde House Decorations Marble Cabinets Cabinets Doors Cabinets Doors Stainless Steel Cabinets Stainless Steel Kitchen Cabinets Marble Cabinets Kitchen Cabinets Door Cabinets Doors Panel Doors
Ground Screw driver,for installing ground screw, mainly applied for mounting garden fences,traffic guidancs,advertising boards,carports,flagpoles,wooden houses,Constructional Industry and etc. Electric tool max. power consumption is 1800W-5000W and workers can install more effective and saving time. Manual tool also widely used because of easy installation.
Driven piling is well known for the following advantages for construction issues –
Relatively small and lightweight equipment is required
Relatively small cross-section and high strength helps penetration in firm soil
Require minimal site preparation
Spoil free means minimal cost for disposal of site debris
Cost-effectiveness where many piles are required
High productivity compared to traditional concrete raft foundations
Suitability for a variety of ground conditions.
Honde Ground Screw, equipped with the most sophisticated installation machines, ensures your ground mount installation in any soil environment and
any applications is handled with precision and speed. Honde have developed two type of machinery with the strategic partner for ground screw installation,
the electric pile driver and Manual Pile Driver.
Electric Pile Driver,Screw Pile Driver,Hydraulic Pile Driver
Hebei Honde Plastic & Metal Co., Ltd. , https://www.foundation-system.com