Development and Promotion of Mechanical "Sand Screen" in Deep Well Ultra Deep Shaft Electric Pumping Technology

I. Overview: For oil fields with 3500m ~ 6000m of oil layer and formation temperature of 100 ~ 146 ℃, the reservoirs are loose, easy to produce sand and contain corrosive media such as CO2. These characteristics make it necessary to choose high strength, high permeability, Good, deformation ability, high temperature resistance and corrosion resistance of the strong "sand screen." Through certain research and access to a large amount of information, we think: the best selection of 13Cr base tube or super 13Cr; filter section using ultra-thin stainless steel mesh composite filter. This measure will greatly improve and enhance the comprehensive capabilities of sand control, sand filtration, corrosion resistance, high temperature resistance and deformation resistance. If the "sand control screen" stable performance, reliable structure, which will greatly reduce excessively rely on the "electric pump" performance, which can reduce the "pump" unit cost. In view of the increasing sanding sand in the electric pump well, the hanger is used to seat the sand control pipe in the middle of the oil well or hang at the tail of the electric motor to prevent sand from entering the pump body and the oil pipe to improve the operating environment of the electric pump unit , Which will greatly extend and improve the working life of the pump unit operation. Second, the sand screen technology 1, sand control structure: from the inside out by the base pipe, composite sand filter and stainless steel outer sheath and other components. Base pipe using API standard casing or tubing; sand filter cover made of multi-layer stainless steel microporous mesh structure made of advanced welding technology and base pipe welding. Forming a set of high permeability, high strength, high deformation capacity, and high corrosion resistance advantages, and has reliable performance, is one of the high-tech in the field of mechanical sand control. 2, the protective cover with lateral flow hole (1) in the operation process, can well protect the sand filter, to prevent the sand when the filter is punctured well, hanging bad caused by the failure of sand control construction. (2) In the course of work, to prevent fluid erosion of the direct erosion of the sand screen. 3, composite sand filter (1) multi-layer 316L stainless steel precision microporous composite sand control filter, sand high reliability, strong anti-sabotage. (2) Large filter area, 10 times for slotted screens and wire screens, low flow resistance and high output. (3) the filter hole is stable, anti-deformation ability, radial deformation of 40%, the same sand control ability to meet the horizontal well requirements. (4) uniform filter, high permeability, anti-blocking ability, plug cycle is 2 to 3 times the normal screen, and easy to backwash. (5) small diameter, light weight, easy to push in place on long horizontal distance. 4, material and anti-corrosion performance (1), for general requirements, the base pipe using API standard casing or tubing, made of grade J55, N80 and other steel, sand control and outer protective sleeve are made of high quality stainless steel material. (2) For the special requirements of H2S, CO2 and high Cl-wells, the base pipe is made of corrosion-resistant casing or oil pipe or even stainless steel pipe. The sand filter cover and the outer protective cover are made of high quality stainless steel. (3) For deep or ultra-deep wells, the base pipe is 13Cr or super 13Cr; the filter section is made of ultra-thin stainless steel mesh or direct use of the punch sleeve. This measure will greatly improve and enhance the comprehensive capabilities of sand control, sand filtration, corrosion resistance, high temperature resistance and deformation resistance. Third, the sand control media and filtration precision Sand control media GLJD60 GLJD80 GLJD100 GLJD120 GLJD160 GLJD200 GLJD250 GLJD300 GLJD350 Filtering accuracy (μm) 60 300 350 Fourth, the technical parameters (1), the base pipe for the API standard casing or tubing, Its anti-sabotage pressure reaches the API technical requirements, the elongation rate of 2%, the radial deformable amount of 60%, the amount of distortion 1 degree / m, bending deformation 1 degree / m. (2) The sand filter layer is a multi-layer stainless steel mesh composite filter material. Its elongation, radial deformability, torsional deformation and bending deformation are both larger than that of the API pipe. (3) The overall compressive tensile strength of the sand control pipe after welding reaches more than 90% of the base pipe strength V. Schedule Base Pipe Precision Microporous Composite Filter Base Tube Size Weight (㎏ / m) Outer Diameter Weight (㎏ / m) 23 / 8in 6.85 3.0in (76mm) 12 27 / 8in 9.54 3.5in (89mm) 15 31 / 2in 13.7 4.4in (112mm) 20 4in 14.2 4.9in (124mm) 22 41 / 2in 17.3 5.4in (138mm) 25 5in 22.4 5.9in (150mm) 30 51 / 2in 25.3 6.4in (162mm) 35 65 / 8in 35.8 7.5in (192mm) 46 7in 38.7 7.9in (201mm) 50 Note: The length and specifications of the base pipe are determined according to user's requirements.

Cold Storage Room Fast Door

Cold storage room fast door are used to industrial warehouse applications, our cold storage doors combine the latest technology, premium materials and design features to meet the demanding requirements of the cold storage industry. Available as a sliding, swing and vertical lift door, all Cold Guard doors incorporate a tough and thermally neutral fiberglass reinforced pultrusion framework, extruded plastic polymer casings and Non-CFC foamed-in place polyurethane core. We understand the conditions that cold storage doors must endure. Superior design methods and non-corrosive materials ensure that Cold Guard will perform and look good for years to come!

The advantages of cold storage fast room door

Excellent Insulation Properties

Save Money on Temperature Costs

A Variety of Cold Room Options

Temperature Control and Efficiency

One of the most important benefits of our cool room panels is passive temperature control.

Safety for You Too

Not only are our cold room panels very hygienic, they also allow for superior safety. Their low allergenic qualities and enhanced seismic performance will protect you while you`re at work.

Cold Storage Room Fast Door,Freezer Room Fast Door,Freezer Room Insulated Fast Door,Thick Curtain High Speed Door

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfrollershutterdoor.com