Attention should be paid to the construction of light steel keel partition wall
Light steel keel partition wall installation should pay attention to the following essentials: the top and bottom should be used along the top keel and along the ground keel. There should be a vertical keel in the vertical direction and a keel in the door frame. The transverse direction should have a transverse keel. Its accessories include support cards, card holders, corner brackets, connectors and fasteners. These materials are indispensable. The keel along the top and the keel along the ground should be fixed according to the position of the elastic line. The fixing method can be used for nailing, expansion bolts, etc., and the nail distance is not more than 600mm. Vertical keels against the wall and column can be fixed with nails, expansion bolts or wood screws and walls and columns. The nail distance is not more than 900mm. The middle vertical keel shall be set according to the width of the cover panel, not more than 1/2 plate width plus gap width (usually 5mm), and the spacing shall not be greater than 600mm. When the two partition walls are connected longitudinally and laterally, the vertical keel of the intersection is not to be omitted. The cross keel can be fixed by the support card, the card holder and the connecting piece. If necessary, it can be fixed by the blind rivet, but it should not be welded by electric welding. The spacing of the transverse keels should not be greater than 120Omm. A keel must be placed at the seam of the cover panel. The keel shall not be cut or reduced in cross section. The light steel keel partition wall frame can meet the above requirements, which can eliminate the quality problems caused by the structural installation. During the construction process, attention should be paid to the inspection, mainly using manual test and observation inspection methods.
Sleek glass is hard to climb, making a glass pool fence one of our best options when it comes to safety and security as it will effectively prevent children and pets from entering the pool area. And when kids are using the pool, the completely transparent walls make it easy to keep an eye on them, even from outside the pool area. Pool fences save lives. Experts recommend installing a pool safety fence as the best way to protect young children from drowning. Glass pool fences are a modern safety solution to prevent tragic accidents without blocking your view. Our Tempered Glass will be made to meet pool fence design, thickness, size, even with holes.
At present, 12mm TOUGHENED GLASS be chosen more for pool fence panels, hight about 1200mm, width different based on customer's request. And now, some customers also choose Laminated Glass , even SGP laminated glass for pool fence in some special areas, all can be made to request.
So Clear Tempered Glass , Colored Tinted Tempered Glass, Ultra Clear Tempered Glass, Clear Laminated Glass , Colored Laminated Glass , Low Iron Laminated Glass and so on, can also be choice based on request.
Reference photos:
Swimming Pool Fence Glass,Toughened Glass For Pool Fence,12mm Tempered Pool Fence Glass
Shanghai Lead Glass Co.,Ltd , https://www.leadglaze.com